"Anneal" Example Sentences
1. In order to improve its mechanical properties, the steel was annealed at a high temperature.
2. The glass bottle was annealed to increase its durability.
3. The metal wire was too brittle until it was annealed.
4. The annealing process is essential to achieving a uniform crystal structure.
5. The company uses annealing to enhance the performance of their electronic components.
6. After the metal sheets were annealed, they became much easier to work with.
7. The glassblower carefully annealed the delicate vase.
8. The annealing process allowed the metal to handle higher temperatures.
9. The steel beams were annealed before construction to strengthen their structure.
10. Annealed glass resists breaking under thermal changes.
11. The manufacturer anneals their products in a vacuum for maximum effect.
12. The scientist monitored the annealing temperature closely to prevent deformation.
13. The copper tubing was annealed before installation to prevent cracks.
14. The metal sheets were annealed to make them more resistant to corrosion.
15. The performance of the machinery improved after annealing its critical components.
16. The annealed parts were tested for their improved mechanical properties.
17. The annealing process induces faster kinetics for electron trapping and release.
18. Copper wire is usually annealed to make it more ductile.
19. The steel was capable of withstanding more stress after the annealing process.
20. Annealing is a necessary step in the production of certain electronic components.
21. The experimental results suggest that annealing is an effective method for enhancing material strength.
22. The aluminum was annealed to increase its electrical conductivity.
23. The glass was carefully annealed in an oven to reduce stress.
24. The annealed metal had a much smoother and more consistent texture.
25. The crystal structure of the material was significantly altered after annealing.
26. The glass manufacturer uses annealing to reduce the occurrence of surface defects.
27. The metal parts were annealed to improve their fatigue life.
28. The quality of the steel was greatly improved after annealing.
29. The thermal conductivity of the metal was increased after annealing.
30. The annealing process resulted in a more uniform microstructure of the material.
Common Phases
1. Heat to a specific temperature and hold for a period of time to
anneal the material;
2. Slowly cool the material to room temperature to complete the
annealing process;
3. Reheat the material to relieve any residual stress from the
annealing process;
4. Repeat the
annealing process multiple times for maximum effect;
5. Use a protective atmosphere during
annealing to prevent oxidation or other unwanted reactions.