"Circlips" Example Sentences
1. The mechanic used circlips to secure the piston rings.
2. These circlips are crucial for keeping the bearings in place.
3. You should always check the circlips when replacing brake pads.
4. The circlips on the valve stem need to be properly seated.
5. Make sure the circlips are evenly spaced around the shaft.
6. Are there any spare circlips in the tool kit?
7. You'll need a special tool to install the circlips correctly.
8. The circlips are worn and need to be replaced.
9. He accidentally dropped one of the circlips and it went missing.
10. These circlips are designed to withstand high temperatures.
11. Someone forgot to install the circlips on the gear assembly.
12. Check the circlips for signs of corrosion or rust.
13. These reinforced circlips are specifically made for heavy-duty use.
14. The circlips came loose and caused damage to the engine.
15. Do we have any spare circlips of this size?
16. Installing circlips can be tricky, so take your time.
17. The circlips on the air filter housing were loose.
18. These circlips are made from durable, high-quality steel.
19. The circlips on the drive shaft were not installed properly.
20. Where can I find replacement circlips for this model?
21. I can see that one of the circlips is missing from the linkage assembly.
22. Be sure to inspect the circlips when servicing the equipment.
23. The circlips are essential components of the hydraulic system.
24. It's important to select the correct size circlips for the job.
25. Have you checked the circlips on the bearings before reassembling?
26. Don't forget to add the circlips when installing the snap ring.
27. The manufacturer recommends replacing the circlips every few years.
28. Due to their small size, circlips can be easily misplaced.
29. These circlips are made to exact specifications for precise performance.
30. The circlips ensure that the shafts stay securely in place.
Common Phases
not use
circlips that have been previously used; position the
circlips with the open end facing away from the direction of rotation; ensure the
circlips are properly seated in the groove; use the correct size circlip for the application; inspect the circlip for damage or wear before installation.