"Clinker" Example Sentences
1. The clinker bricks used in the building added a unique texture.
2. I need to remove the clinker from the fireplace before we use it.
3. The ship's clinker-built hull was strong enough to withstand rough seas.
4. The clinker crusher worked overtime to break up the stubborn blocks.
5. The cement plant produced tons of clinker every day.
6. The clinker was ground into powder to make cement.
7. The clinker formation in the furnace caused a decrease in efficiency.
8. The clinker formed a layer of ash on the surface of the coal.
9. The clinker from the blast furnace was too hot to handle.
10. The clinker tiles gave the pathway a rustic look.
11. The clinker formation in the engine caused a loss of power.
12. The clinker in the boiler needed to be removed to prevent damage.
13. The clinker was piled up in a huge mound at the factory.
14. The clinker was the culprit behind the air pollution in the area.
15. The clinker clogged the pipes, causing a backup in the system.
16. The clinker made the sidewalk uneven and dangerous to walk on.
17. The clinker cemented the rocks together in a natural formation.
18. The clinker was scraped off the surface of the road to improve traction.
19. The clinker added to the mix gave the concrete a stronger bond.
20. The clinker dust in the air made it difficult to breathe.
21. The clinker was used as a decorative feature in the garden.
22. The clinker was so hard that it could not be broken without heavy machinery.
23. The clinker formed a crust on the top of the molten lava.
24. The clinker made the bricks look darker and more weathered.
25. The clinker was used to make the statues and monuments in the town square.
26. The clinker in the chimney caused a fire hazard and needed to be removed.
27. The clinker was pushed out of the coal furnace by the air pressure.
28. The clinker paving stones were chosen for their durability and strength.
29. The clinker was used as a filler material in the road construction.
30. The clinker from the iron ore smelting process was recycled to reduce waste.
Common Phases
1. The
clinker formation process involves heating raw materials at high temperatures;
2. During the
clinker grinding process, the
clinker particles are ground into finer particles;
3.
Clinker quality control is essential to ensure consistent product quality;
4. The
clinker cooler cools the
clinker from temperatures exceeding 1400°C to below 200°C before it is stored;
5.
Clinker production is the first step in cement manufacturing;
6. The
clinker silo stores the finished
clinker product until it is ready to be transported;
7. High levels of
clinker substitution in cement production can result in reduced carbon emissions;
8. The
clinker formation chemistry involves complex reactions between raw materials and heat.