"Crankcases" Example Sentences
1. The crankcases of the industrial engines were needed to be cleaned regularly.
2. Your car's crankcases are in need of a oil change.
3. Mark wanted to replace the crankcases of his motorbike for better performance.
4. My mechanic said that the crankcases of my generator had cracked due to overheating.
5. The oil leak was caused by a damaged gasket in the crankcases.
6. The crankcases of the four-stroke engine were much smoother than the two-stroke.
7. The crankcases of the old tractor had rusted and corroded beyond repair.
8. The design of the crankcases in modern engines has evolved over time.
9. The mechanic had to remove the crankcases to access the damaged part.
10. The heat-resistant paint was applied to the crankcases of the exhaust system.
11. The crankcases of the airplane engine were designed to withstand extreme temperatures.
12. The car manufacturer issued a recall for the faulty crankcases in some of their models.
13. The purpose of the crankcases is to hold the crankshaft and related components.
14. The quality of the crankcases determines the durability and longevity of the engine.
15. The crankcases in the V8 engine were much larger than in the V6 engine.
16. I could hear a rattling noise coming from the crankcases of the lawn mower.
17. The oil filters were clogged due to excessive particles in the crankcases.
18. The mechanic had to disassemble the crankcases to fix the broken gear.
19. The crankcases of the marine engine had become contaminated with saltwater.
20. The cracked crankcases were a result of improper maintenance.
21. The vibration from the engine caused the bolts on the crankcases to loosen.
22. The camshaft was located inside the crankcases on the small engine.
23. The crankcases of the race car engine were customized to meet certain specifications.
24. The worn out bearings inside the crankcases were causing the engine to seize.
25. The new crankcases enhanced the performance of the motorcycle.
26. The crankcases on the generator were damaged during shipping.
27. The crankcases were coated with a layer of protective oil to prevent rusting.
28. The mechanic inspected the crankcases for signs of wear and tear.
29. The size and shape of the crankcases differed between the diesel and petrol engines.
30. The engineer designed the crankcases to reduce engine noise and vibration.
Common Phases
1. The
crankcases of the engine were disassembled and inspected;
2. A new gasket was installed on the
crankcases;
3. The mechanic noticed a crack in one of the
crankcases;
4. The
crankcases were cleaned thoroughly before reassembly;
5. The manufacturer recommends changing the oil in the
crankcases every 5,000 miles;
6. The engineer designed the
crankcases to optimize oil flow;
7. The replacement
crankcases were made from a stronger alloy;
8. The mechanic discovered metal shavings in the
crankcases;
9. The
crankcases were machined to ensure proper fit and alignment;
10. It is important to properly torque the bolts on the
crankcases to prevent leaks.