"Datumed" Example Sentences
1. The surveyor datumed the location of the property using a GPS device.
2. The map was datumed to a specific coordinate system for accurate measurements.
3. The sea level was datumed as the reference point for altitude measurements.
4. The satellite was datumed to the Earth's equator for optimal coverage.
5. The telescope was datumed to track the motion of the stars.
6. The navigation system was datumed to the nearest landmark for accurate directions.
7. The surveying team datumed all the corners of the building for precise measurements.
8. The drone was datumed to fly at a specific height above the ground.
9. The sonar equipment was datumed to scan the ocean floor for underwater exploration.
10. The radar system was datumed to detect incoming objects from a specific direction.
11. The laser measurement tool was datumed to calculate the distance to the target accurately.
12. The land surveyor datumed the boundaries of the property for legal purposes.
13. The position of the spacecraft was datumed to navigate through space.
14. The weather balloon was datumed to determine the atmospheric pressure at different altitudes.
15. The robotic arm was datumed to pick up objects in a specific location.
16. The seismometer was datumed to detect earthquakes and their epicenter.
17. The camera was datumed to capture images from a specific angle and distance.
18. The radio telescope was datumed to receive signals from deep space.
19. The motion sensor was datumed to detect movements within a certain range.
20. The altimeter was datumed to measure the height of the airplane above sea level.
21. The fish finder was datumed to locate schools of fish for commercial fishing.
22. The geiger counter was datumed to measure radiation levels in the area.
23. The spectrometer was datumed to analyze the chemical composition of substances.
24. The autofocus feature of the camera datumed to focus on the subject in the center of the frame.
25. The rotating platform was datumed to align with the set of coordinates for further calculations.
26. The infrared detector was datumed to detect heat signatures of living beings.
27. The soil moisture sensor was datumed to detect the amount of water in the soil.
28. The time-lapse camera was datumed to take photos at specific intervals for a time-lapse video.
29. The thermometer was datumed to measure the temperature in Celsius or Fahrenheit.
30. The barcode scanner was datumed to read the unique barcode of each product.
Common Phases
1. The
datumed value was recorded accurately;
2. The
datumed point was used as a reference for measurement;
3. The
datumed feature was critical in aligning the parts;
4. The position was adjusted based on the
datumed surface;
5. The
datumed plane was established as the primary reference;
6. The
datumed datum was crucial in achieving the desired tolerance;
7. The feature was inspected using the
datumed coordinate system;
8. The
datumed axis was identified as the primary reference for rotation;
9. The alignment was checked based on the
datumed point;
10. The part was machined with respect to the
datumed surface.