"Filtrates" Example Sentences
1. The filtration process separates the solids from the filtrates.
2. The filtrates from the chemical reaction were tested for purity.
3. The lab technician removed the filtrates from the centrifuge.
4. The filtrates had a distinct odor of ammonia.
5. The experiment required the removal of the filtrates every 10 minutes.
6. The filtrates were disposed of properly, following laboratory protocols.
7. The process of filtration produced clear and pure filtrates.
8. The filtrates were analyzed for their chemical composition.
9. The technician carefully measured the volume of the filtrates.
10. The filtration paper prevented any solid particles from contaminating the filtrates.
11. The sample of urine was analyzed for its filtrates.
12. The filtrates were collected in a sterile container to prevent any contamination.
13. The water was boiled to eliminate any impurities in the filtrates.
14. The technician added a reagent to the filtrates to detect the presence of a particular chemical.
15. The filtrates were stored in a cool and dry place to prevent any bacterial growth.
16. The lab protocol required the filtration of the solution to obtain clear filtrates.
17. The experiment required the use of a filtering funnel to obtain the filtrates.
18. The color of the filtrates indicated the presence of a particular compound.
19. The filters were replaced regularly to ensure the purity of the filtrates.
20. The filtrates were diluted to obtain a clear solution.
21. The chemistry experiment required the careful separation of the solids and the filtrates.
22. The lab technician carefully monitored the filtration process to obtain clear filtrates.
23. The filtrates were subjected to additional chemical tests to confirm their composition.
24. The experiment required the use of a vacuum filtration system to separate the solids and the filtrates.
25. The technician used a pipette to accurately measure the volume of the filtrates.
26. The clarity of the filtrates indicated the success of the filtration process.
27. The experiment required the precise measurement of the weight of the solids and the filtrates.
28. The filtrates were pale yellow, indicating the presence of a particular compound.
29. The lab equipment was cleaned thoroughly to prevent any contamination of the filtrates.
30. The filtration process produced a clear separation of the solids and the filtrates.
Common Phases
1. The
filtrates were collected and analyzed;
2. The
filtrates were further purified using a filtration system;
3. The separation of the
filtrates allowed for identification of specific chemical compounds;
4. After filtration, the remaining
filtrates were discarded;
5. The
filtrates were tested for bacterial contamination;
6. Multiple
filtrates were combined to create a larger sample for analysis;
7. The color of the
filtrates indicated the presence of certain substances;
8. The pH level of the
filtrates was measured and recorded;
9. A series of
filtrates were collected to create a time course analysis;
10. The process of filtration resulted in clear and transparent
filtrates.