Flangetee example sentences

"Flangetee" Example Sentences

1. The plumber needed a flangetee to connect the pipes.
2. The fitting required a custom flangetee to be installed.
3. The technician replaced the old flangetee with a brand new one.
4. The flangetee was rusted and needed to be replaced immediately.
5. The flangetee was made of steel, which made it extra durable.
6. The assembly process involved securing the flangetee onto the equipment.
7. The engineer designed a special flangetee for the project.
8. The installation team made sure the flangetee was properly aligned before tightening the bolts.
9. The damaged flangetee caused a leak in the system.
10. The manufacturer sent a replacement flangetee free of charge.
11. The flangetee was too small for the job and had to be exchanged for a larger size.
12. The flangetee needed to be adjusted for the equipment to function properly.
13. The technician inspected the flangetee and found it to be in good condition.
14. The flangetee had to be welded onto the equipment for added stability.
15. The maintenance team cleaned the flangetee to prevent corrosion.
16. The flangetee was painted to match the color of the equipment.
17. The flangetee was an essential component of the system.
18. The plumber used a joint clamp to secure the flangetee in place.
19. The defective flangetee was returned to the manufacturer for analysis.
20. The new flangetee had a better design that improved the efficiency of the system.
21. The parts list included one flangetee and two bolts.
22. The old flangetee was difficult to remove due to corrosion.
23. The flangetee was inspected before and after installation to ensure proper function.
24. The flangetee was threaded for easy connection to the pipes.
25. The flangetee was cast iron and could withstand high pressure.
26. The technician used a torque wrench to tighten the flangetee bolts.
27. The flangetee was a standard size and readily available at most hardware stores.
28. The flangetee had to be replaced due to wear and tear over time.
29. The damaged flangetee caused a delay in the project completion.
30. The flangetee was securely fastened to prevent any leaks or malfunctions.

Common Phases

not separate the flange from the tee; ensure a proper seal between the flange and tee; tighten the bolts evenly on the flange and tee; verify alignment of the flange and tee before installation; inspect the flange and tee for damage before use.