Gasket example sentences

"Gasket" Example Sentences

1. He replaced the gasket on the car engine.
2. She carefully inspected the gasket for any signs of wear.
3. He removed the old gasket and replaced it with a new one.
4. The gasket was worn and needed to be replaced.
5. He applied a thin layer of sealant to the gasket.
6. She carefully fit the gasket into place.
7. The gasket had to be cut to the right size.
8. He tightened the bolts to secure the gasket.
9. She tested the gasket for any leaks.
10. The gasket was not the right size for the hole.
11. He replaced the gasket with a thicker one.
12. She wiped away the excess sealant from the gasket.
13. He made sure the gasket was properly sealed.
14. The gasket had to be changed to prevent a leak.
15. He replaced the gasket with a higher quality one.
16. She tightened the screws to secure the gasket.
17. He applied a thin layer of grease to the gasket.
18. The gasket needed to be replaced due to wear.
19. He checked the gasket for any signs of damage.
20. She made sure the gasket was properly aligned.
21. He replaced the old gasket with a new one.
22. The gasket had to be replaced due to a leak.
23. She used a special sealant to secure the gasket.
24. He checked the gasket for any signs of wear.
25. The gasket was not the right size for the application.
26. He used a special tool to tighten the gasket.
27. She wiped away the excess grease from the gasket.
28. The gasket had to be replaced due to corrosion.
29. He applied a thin layer of adhesive to the gasket.
30. She made sure the gasket was properly sealed.
31. He replaced the gasket with a stronger one.
32. The gasket had to be cut to fit the hole.
33. She tested the gasket for any signs of leakage.
34. He tightened the clamps to secure the gasket.
35. The gasket had to be replaced due to a faulty seal.
36. She applied a thin layer of lubricant to the gasket.
37. He checked the gasket for any signs of corrosion.
38. The gasket was not the right size for the pipe.
39. He replaced the old gasket with a stronger one.
40. She used a special tool to tighten the gasket.

Common Phases

Cutting gaskets; Installing gaskets; Replacing gaskets; Sealing gaskets; Maintaining gaskets.