"Hardener" Example Sentences
1. The hardener is an essential ingredient in the resin coating.
2. You need to add a catalyst to activate the hardener.
3. The surface will dry quickly with the addition of a hardener.
4. This particular hardener is ideal for use in marine environments.
5. The hardener takes a couple of hours to fully cure.
6. Always mix the hardener with the resin thoroughly.
7. This type of hardener is heat-resistant and durable.
8. The hardener will change the viscosity of the liquid.
9. The ratio of resin to hardener needs to be precise.
10. A good hardener will increase the strength of the material.
11. The hardener will cause the coating to become shiny and smooth.
12. Some hardeners require special handling due to their toxicity.
13. Adding too much hardener can cause the mixture to become brittle.
14. The hardener will prevent the coating from cracking over time.
15. You can enhance the properties of the hardener with the addition of other chemicals.
16. The hardener will reduce the surface tension of the coating.
17. The hardener will give the material a glossy finish.
18. This type of hardener is commonly used in the automotive industry.
19. The hardener must be stored in a cool, dry place.
20. A slow-acting hardener is preferable when working with a large surface area.
21. The hardener creates a chemical reaction within the mixture.
22. The addition of a hardener will make the coating more waterproof.
23. A good hardener will not discolor the material over time.
24. The hardener can be easily applied with a brush or roller.
25. You can increase the pot life of the mixture with the use of a slow-acting hardener.
26. The hardener will bond the material to the surface it is applied to.
27. This type of hardener is commonly used in epoxy flooring systems.
28. The ratio of hardener to resin can vary depending on the desired application.
29. Always wear personal protective equipment when working with hardeners.
30. The hardener will cause the material to harden and become more durable.
Common Phases
1. Mix the
hardener thoroughly with the resin;
2. Apply the
hardener to the surface with a brush;
3. Allow the
hardener to dry completely before sanding;
4. Mix the
hardener and the filler until it forms a paste;
5. Apply the
hardener to the surface in a thin layer;
6. Wait for the
hardener to cure before applying additional layers;
7. Use protective gloves when handling the
hardener;
8. Do not inhale the fumes from the
hardener;
9. Store the
hardener in a cool, dry place;
10. Dispose of the
hardener according to local regulations.