"Lehr" Example Sentences
1. The lehr in the glass factory was running at full capacity.
2. The pottery was fired in the lehr for 24 hours.
3. Glassware is cooled down slowly in the lehr.
4. The lehr is an important part of the glass manufacturing process.
5. The glass bottles were carefully stacked and fed into the lehr for firing.
6. The lehr operator monitored the temperature and humidity of the glass during firing.
7. The lehr belt experienced some problems, causing a delay in production.
8. It's important to keep the lehr clean to avoid contaminating the glass.
9. The lehr schedule had to be adjusted due to maintenance issues.
10. The lehr flame was adjusted to achieve the desired temperature for firing.
11. The glass sheets were cut and loaded into the lehr for firing.
12. The temperature in the lehr needs to be carefully controlled to prevent cracking.
13. The lehr loading and unloading process requires skilled workers.
14. The heating elements in the lehr needed to be replaced.
15. A sudden power outage shut down the lehr, causing a loss in production.
16. The lehr runs continuously to keep up with demand.
17. The glassware was inspected for defects before being sent into the lehr.
18. The lehr exhaust system needed to be repaired to prevent air pollution.
19. The lehr conveyor belt transports the glassware through the firing process.
20. The lehr is an essential piece of equipment in any glass manufacturing plant.
21. The lehr temperature needs to be carefully monitored to prevent overheating or underheating.
22. The glass bottles were carefully removed from the lehr after firing was complete.
23. The lehr environment needs to be carefully controlled to prevent contamination.
24. The lehr operator needs to be skilled in adjusting the firing conditions to achieve the desired result.
25. The raw materials are melted and then cooled down slowly in the lehr to create glass.
26. The lehr was shut down for maintenance, causing a delay in production.
27. The glassware passed through several lehrs during the manufacturing process.
28. The lehr temperature was gradually lowered to ensure that the glass didn't crack during cooling.
29. The glassblowers carefully crafted the shapes and then sent them into the lehr for firing.
30. The lehr cycle time needs to be optimized to minimize energy consumption.
Common Phases
1. The glassware is cooled down in the
lehr;
2. The
lehr ensures that the glass is evenly heated;
3. The
lehr is an essential part of the glass manufacturing process;
4. The glass is slowly brought up to the desired temperature inside the
lehr;
5. The quality of the glass depends heavily on the temperature control inside the
lehr;
6. The annealing process is completed inside the
lehr;
7. The
lehr kiln is carefully monitored to prevent any defects in the glassware;
8. The
lehr conveyor system moves glass products smoothly and safely through the kiln;
9. The
lehr plays a crucial role in the production of high-quality glass products.