Microns example sentences

"Microns" Example Sentences

1. The thickness of the paper is measured in microns.
2. The particle size is usually listed in microns.
3. The filter can capture particles as small as 5 microns.
4. The dimensions of the cell were less than 20 microns.
5. The coating thickness needs to be at least 15 microns.
6. The airflow rate can be adjusted to 100 microns per second.
7. The laser was used to etch a pattern on the surface with microns precision.
8. The size of the virus is measured in nanometers and microns.
9. The depth of the scratch was only a few microns.
10. The microscope can magnify up to 1000 microns.
11. The paint thickness needs to be accurately measured in microns.
12. The film thickness was not uniform and varied between 5 and 15 microns.
13. The sample was mounted on a slide with a thickness of 100 microns.
14. The laser was able to cut the material to within a few microns of accuracy.
15. The diameter of the hair strand is usually around 100 microns.
16. The LED emits light of a specific wavelength in the range of microns.
17. The accuracy of the measurement was within a few microns.
18. The mesh size of the sieve is measured in microns.
19. The thickness of the plastic sheet was only a few microns.
20. The width of the line drawn by the pen was only a few microns.
21. The gap between the two surfaces was less than 10 microns.
22. The size of the pore in the filter was less than 5 microns.
23. The resolution of the printer is measured in dots per inch or microns.
24. The thickness of the coating needs to be uniform within a few microns.
25. The research requires accurate measurements at the scale of microns.
26. The bacteria are usually between 1 and 10 microns in size.
27. The gap between the two lenses needs to be adjusted to a few microns.
28. The film was deposited on the substrate with a thickness of 100 microns.
29. The sample preparation requires cutting slices of a few microns in thickness.
30. The surface roughness is usually characterized by microns or nanometers.

Common Phases

1. The particle size was measured in microns;
2. The device had a sensitivity of 10 microns;
3. The sample was ground to a size of 50 microns;
4. The filter had a pore size of 5 microns;
5. The surface roughness was measured in microns.