Pinion example sentences

"Pinion" Example Sentences

1. The bird's pinion was damaged, so it couldn't fly.
2. The mechanic replaced the worn pinion in the engine.
3. The hiker could see the pinion trees in the distance.
4. The clock's pinion gear was broken, causing it to stop working.
5. The windmill's pinion wheels turned slowly in the breeze.
6. The pinion nuts held the car's tire in place.
7. The bird's pinion feathers were molted and needed regrowing.
8. The pinion joints in the machine needed to be oiled regularly.
9. The airplane's pinion flap helped to control its speed during landing.
10. The chef added pinion nuts to the salad for a little crunch.
11. The pinion shaft connected the motor to the driveshaft.
12. The outdoor enthusiast loved hiking in the pinion-covered hills.
13. The pinion bearing needed to be replaced as it was starting to wear.
14. The automobile's steering system had a pinion gear that aided in turning the wheels.
15. The pinion mount was secured tightly to the frame of the vehicle.
16. The bird's pinion feathers had a beautiful iridescence in the sunlight.
17. The pinion bushing had to be replaced in the tractor's gearbox.
18. The pinion gear aligned with the rack gear to create movement in the machinery.
19. The pinion brake helped to stop the machine quickly in case of an emergency.
20. The pinion assembly had several small parts that needed to be assembled carefully.
21. The outdoor shop sold pinion firewood for campfires.
22. The gear train included a pinion gear, idler gear, and output gear.
23. The pinion drive was controlled by the steering wheel in the car.
24. The pinion angle determined the angle of the driveshaft in the automobile.
25. The pinion flange connected the driveshaft to the differential.
26. The pinion yoke was responsible for holding the driveshaft in place.
27. The pinion cord was wrapped tightly around the pulley system.
28. The pinion tooth meshed with the rack gear teeth to create motion.
29. The pinion snap ring prevented the assembly from coming apart during operation.
30. The pinion set included several gears that created movement in the machine.

Common Phases

1. The pinion needs to be replaced;
2. The pinion is a small but crucial part of the machine;
3. The pinion gear is worn out and needs to be replaced;
4. The pinion shaft has become loose and needs to be tightened;
5. The pinion set is now correctly aligned;
6. The pinion gear has sheared off its teeth;
7. The pinion has a special design for optimal performance.