Pitons example sentences

"Pitons" Example Sentences

1. He fixed the pitons firmly into the rock face.
2. Without his pitons, he wouldn't have been able to scale the mountain.
3. She carefully examined the pitons before using them to climb.
4. The rock was too tough for the pitons to stick properly.
5. They had to hammer the pitons into the frozen ground.
6. The rock climbers strapped on their harnesses and grabbed their pitons.
7. They used the pitons to anchor themselves during the ascent.
8. The metal of the pitons glinted in the sun.
9. He packed his pitons carefully in his gear bag.
10. The pitons were the only things that kept them from falling.
11. She expertly placed the pitons in the cracks and crevices of the rock.
12. The pitons rattled in his pack as he moved.
13. He had to replace his bent piton before continuing his climb.
14. The pitons left marks on the rock surface.
15. The climbers shared their pitons and other equipment.
16. Her heart raced as she pounded the pitons into the rock.
17. The pitons shook as the other climbers passed by.
18. The wind whistled through the pitons and ropes.
19. His fingers were numb from handling the cold pitons.
20. The climbers carefully removed their pitons as they descended.
21. The pitons were the most important tool for the climbers.
22. The mountain guide had a collection of different pitons for different types of rock.
23. The pitons were covered in rust and needed to be replaced.
24. He slid the piton along the crack until it found the right spot.
25. The climbers worked together to remove the pitons from the overhang.
26. The pitons were all that stood between them and the ground far below.
27. The pitons were secured with sturdy ropes to prevent them from falling.
28. The sound of the pitons hammered into the rock echoed across the valley.
29. He used all of his strength to pound the stubborn piton deeper into the rock.
30. The climbers paused to catch their breath before using the pitons to continue their ascent.

Common Phases

1. Hammer in the pitons;
2. Secure the rope to the pitons;
3. Climb up to the next set of pitons;
4. Place the pitons carefully;
5. Test the pitons before using them;
6. Remove the pitons as you go;
7. Use pitons to anchor the tent;
8. Attach gear loops to the pitons for easy access.