Solder example sentences

"Solder" Example Sentences

1. The mechanic used solder to repair the broken wiring.
2. The new part needed to be soldered into place on the circuit board.
3. They soldered wires to connect the electrical components together.
4. She applied the flux before soldering the joint.
5. The two metal pieces had to be heated while solder was applied to join them securely.
6. I had to re-solder some of the loose connections on the old radio.
7. He applied soldering iron to the metal workpiece.
8. The jeweler used solder to permanently join the ring parts together.
9. The plumber soldered pipes to create watertight connections.
10. The stained glass artist soldered the lead cames to hold the glass pieces in place.
11. She tin-coated the metal to prepare it for soldering.
12. The seams were soldered shut to make the container airtight.
13. They applied flux and solder to secure the tube fittings.
14. The jewelry expert re-soldered the loose prongs holding the gemstones.
15. The mechanic applied soldering paste before applying the new terminals to the battery posts.
16. The novice solderer made a mess by applying too much solder to the joint.
17. He carefully soldered wires to the contact points on the circuit board.
18. The flashing needed to be re-soldered to prevent leaks.
19. The stained glass pieces had to be secured by carefully soldering the copper foil to the cames.
20. The tin coating prevented the molten solder from corroding the parts.
21. He applied flux to clean the copper pipes before attempting to solder them.
22. She heated the soldering iron to the proper temperature for the job.
23. The locksmith soldered a new tumbler onto the lock mechanism.
24. Careful soldering of the metal components ensured the device would function properly.
25. Smoke from the flux heating up while soldering made them open the windows.
26. The foot of the candlestick needed re-soldering to make it secure.
27. The soldering pen quickly joined wires without unsightly blobs of solder.
28. The mechanic had to re-solder the loose terminals on the car battery.
29. They applied more flux to prepare for another round of soldering joints.
30. The jeweler carefully soldered the gold prongs into place holding the diamond.
31. The soldier used his soldering iron to fix broken equipment in the field.
32. The stained glass window had needed frequent re-soldering of loose joints over the years.
33. They used rosin core solder on the electrical wiring for convenience.
34. The blacksmith coated the metal pieces in flux before attempting to solder them together.
35. The new hook could not be attached without first soldering it to the chainlink.
36. After soldering the new connections, he applied liquid electrical tape to protect the wires.
37. The novice attempted to solder the copper parts but did not achieve a proper joint.
38. The pipe fittings needed to be re-soldered to stop the water leak.
39. She applied just enough heat while soldering to avoid melting the plastic parts.
40. They used a continuous soldering iron tip for large soldering jobs.
41. Too little flux resulted in poor adhesion between the solder and metal.
42. He applied flux and used solder braid to clean up solder spills during the soldering process.
43. She used a blowtorch to solder the thick metal components together.
44. Twisted wires were difficult to solder smoothly into place.
45. After soldering the joints, he let them cool before testing the circuit.
46. The silver bracelet required re-soldering of several loose stones.
47. The electronics technician carefully soldered surface mount components onto the circuit board.
48. She used silver solder with a high melting temperature for the metalworking project.
49. They needed solder paste to reliably join the fine SMT components.
50. Silicone coated soldering wire protected the wires from high temperatures.
51. The stained glass pieces were securely soldered with copper foil came work.
52. Spot soldering techniques were used to join the components sparingly.
53. The stained glass artist fluxed and soldered the lead cames to create a beautiful windowpane.
54. They re-flowed all of the SMD solder joints on the circuit board for reliability.
55. The furnace needed re-soldering of a leaky seam before passing inspection.
56. Lead-free solder was required for electronics compliance.
57. The jeweler carefully tinned the jumper wires before soldering them to the circuit board.
58. After soldering the connections, a conformal coating was applied for protection.
59. The locksmith re-soldered several pins during the lock rekeying procedure.
60. He carefully soldered the circuit board components to avoid lifting any pads.

Common Phases

1. apply solder
2. apply flux
3. tin the solder joint
4. heat the solder joint
5. reflow the solder
6. tin the metal
7. re-tin the solder joint
8. solder joint failed
9. leaking solder joint
10. cold solder joint
11. melt the solder
12. clean the solder joint
13. well-soldered joint
14. secure with solder
15. corroded solder joint
16. flow the solder
17. dab of solder
18. blob of solder
19. tin the tips
20. resolder the connection