Subassembly example sentences

"Subassembly" Example Sentences

1. The subassembly of the motor was completed.
2. The subassembly was carefully inspected before being incorporated into the final product.
3. The subassembly consisted of several smaller components.
4. The manufacturing process involved assembling the subassembly before attaching it to the main unit.
5. The subassembly was tested to ensure that it met quality standards.
6. The subassembly was disassembled and inspected for any defects.
7. The worker carefully installed the subassembly in its designated place.
8. The subassembly was shipped separately to avoid damage during transportation.
9. The design team made several revisions to the subassembly before finalizing it.
10. The subassembly process involved precise measurements and alignment.
11. The subassembly included parts that were sourced from different suppliers.
12. The subassembly was made in a separate facility to increase efficiency.
13. The subassembly was completed ahead of schedule.
14. The subassembly was a critical component of the larger system.
15. The subassembly was designed to be easily replaced if necessary.
16. The subassembly was removed and replaced with a new one to resolve the issue.
17. The subassembly was not functioning properly and required repair.
18. The subassembly was coated with a protective layer before installation.
19. The subassembly was fitted with a special tool to prevent damage during installation.
20. The subassembly was made from high-quality materials to ensure durability.
21. The subassembly was inspected using a series of tests to ensure functionality.
22. The subassembly was a complex system that required precision engineering.
23. The subassembly was adjusted to meet the specific needs of the customer.
24. The subassembly was delivered to the customer on time and within budget.
25. The subassembly was a critical component of the final product's performance.
26. The subassembly was modified to meet changing requirements.
27. The subassembly was carefully packaged to prevent any damage during shipping.
28. The subassembly was integrated into the larger system seamlessly.
29. The subassembly was designed to be easily accessible for maintenance and repair.
30. The subassembly was completed before the rest of the product was assembled.

Common Phases

1. Adding the subassembly to the main assembly;
2. Aligning the subassembly with the mating part;
3. Tightening the fasteners to secure the subassembly;
4. Testing the subassembly for proper functionality;
5. Inspecting the subassembly for any defects;
6. Lubricating the subassembly for smooth operation;
7. Calibrating the subassembly to ensure accuracy;
8. Removing the subassembly for maintenance or repair;
9. Replacing the subassembly with an upgraded version;
10. Documenting any changes or modifications to the subassembly.