Tappet example sentences

"Tappet" Example Sentences

1. The mechanic carefully adjusted the tappet clearance.
2. A worn tappet caused the engine to misfire.
3. Replacing the tappet was a straightforward repair.
4. The noisy tappet indicated a problem needing immediate attention.
5. He suspected a faulty tappet was the source of the rattle.
6. The technician inspected each tappet individually.
7. Are all the tappets correctly aligned?
8. The damaged tappet needed replacing urgently.
9. He lubricated each tappet before reassembly.
10. The engine's performance improved after the tappet adjustment.
11. That clicking sound is definitely a bad tappet.
12. A broken tappet can lead to catastrophic engine failure.
13. Checking the tappet clearance is part of routine maintenance.
14. The new tappets were precisely machined.
15. He used a special tool to measure the tappet gap.
16. The mechanic replaced the entire set of tappets.
17. Incorrect tappet adjustment can cause valve damage.
18. This engine's design uses hydraulic tappets.
19. The old tappet was completely worn down.
20. Adjusting the tappets requires patience and precision.
21. The sound of the faulty tappet was quite noticeable.
22. They diagnosed the problem as a sticking tappet.
23. The tappet assembly was carefully cleaned.
24. He ensured each tappet was correctly seated.
25. A single faulty tappet can affect the whole engine.
26. Regular tappet checks are essential for engine longevity.
27. The tappet’s function is crucial for valve operation.
28. He replaced the tappet with a genuine part.
29. The tappet was seized, requiring forceful removal.
30. Improperly installed tappets can lead to serious issues.
31. The engine ran smoothly after the tappets were adjusted.
32. He learned how to adjust tappets during his apprenticeship.
33. The tappet noise was a constant reminder of the problem.
34. Diagnosing a tappet issue requires a trained ear.
35. The tappet was made of hardened steel.
36. With the new tappet, the engine purred like a kitten.
37. He used a feeler gauge to check the tappet clearance.
38. The tappet design varied slightly between models.
39. The tappet were meticulously cleaned before installation.
40. The workshop had a stock of replacement tappets.
41. Adjusting the tappets was a time-consuming task.
42. A loose tappet caused a persistent knocking sound.
43. The tappet mechanism was surprisingly complex.
44. He examined the tappet for signs of wear and tear.
45. The cost of replacing the tappets was surprisingly high.
46. The tappet was difficult to access, requiring disassembly of other components.
47. The engine's quiet operation indicated that the tappets were properly adjusted.
48. He double-checked the tappet adjustment after reassembly.
49. The technician used a torque wrench to tighten the tappets.
50. The article detailed the process of replacing tappets in various engine types.

Common Phases

1. Tappet clearance is crucial for engine performance.
2. Adjusting tappets is a regular maintenance task.
3. Worn tappets can lead to a noisy engine.
4. Hydraulic tappets eliminate the need for manual adjustment.
5. The tappet's role is to transfer force from the camshaft to the valve.
6. Inspecting the tappets is part of a thorough engine overhaul.
7. A bent tappet rod can cause engine failure.
8. Replacing tappets is a relatively straightforward repair.
9. The tappet design varies depending on the engine type.
10. Incorrect tappet timing affects valve operation.