Valve example sentences
- Home
- "Valve" example sentences
Related (10): gate, globe, ball, butterfly, check, relief, plug, diaphragm, pinch, solenoid
"Valve" Example Sentences
1. The plumber tightened the valve to stop the leak.
2. The oil pressure valve needs to be replaced.
3. The steam valve releases pressure from the system.
4. The valve on the propane tank was left open.
5. The heart valve surgery was successful.
6. The valve on the water main was stuck.
7. The exhaust valve on the car was faulty.
8. The safety relief valve is an important component of the system.
9. The pilot light valve needed to be adjusted.
10. The pneumatic valve controls the airflow.
11. The valve stem was corroded and needed to be replaced.
12. The irrigation valve controls water flow to the crops.
13. The valve cover gasket was leaking oil.
14. The ball valve is easy to operate.
15. The check valve prevents water from flowing backwards.
16. The solenoid valve controls the flow of gas.
17. The diaphragm valve is used in industrial applications.
18. The butterfly valve regulates the flow of fluids.
19. The gate valve controls the flow of water in the pipe.
20. The needle valve controls the rate of flow.
21. The relief valve protects the system from over-pressurization.
22. The pressure reducing valve maintains a constant pressure.
23. The vacuum valve regulates air flow in the system.
24. The globe valve is commonly used in plumbing and heating systems.
25. The foot valve is located at the bottom of a pipeline.
26. The cartridge valve is a convenient replacement for traditional valves.
27. The angle valve is used to change the direction of the flow.
28. The motorized valve can be remotely controlled.
29. The three-way valve provides multiple flow options.
30. The solenoid-operated valve is commonly used in irrigation systems.
Common Phases
1. Turn the
valve to the left;
2. Release the pressure from the
valve;
3. Open the
valve slowly;
4. Close the
valve tightly;
5. Check for leaks around the
valve;
6. Adjust the
valve to the desired setting;
7. Clean the
valve thoroughly;
8. Replace the old
valve with a new one;
9. Inspect the
valve for any damage;
10. Lubricate the
valve regularly.
Recently Searched