Wrenches example sentences

"Wrenches" Example Sentences

1. The mechanic used a variety of wrenches to fix the car.
2. I had to use two different wrenches to loosen the bolt.
3. My dad has a huge collection of wrenches in his garage.
4. The plumber tightened the pipe with his wrench.
5. The bolt was so rusted, we had to use a breaker bar instead of a regular wrench.
6. She couldn't get the lug nut off with just her hands, so she had to use a wrench.
7. The bicycle chain kept slipping off, so I had to adjust it with a wrench.
8. The handyman was able to fix the leaky faucet with just a few turns of the wrench.
9. I need to buy a set of wrenches for my toolkit.
10. The electricity was out, so the electrician had to use a flashlight to see which wrench he needed.
11. The plumber said the problem was caused by a faulty wrench that had worn out over time.
12. I watched as the mechanic carefully removed the old spark plugs with his trusty wrench set.
13. The teacher used a wrench to demonstrate how leverage works.
14. The workers used wrenches to secure the scaffolding in place.
15. I accidentally dropped my wrench into the engine, so I had to fish it out with a wire hanger.
16. The mechanic taught me how to properly use a torque wrench to tighten the bolts.
17. The thief used a wrench to break into the car and steal the radio.
18. I had to buy a special wrench to install the new light fixture.
19. The handyman recommended using a crescent wrench to tighten the loose screws.
20. The repairman had to improvise and use a pair of pliers as a makeshift wrench.
21. The soldier used a wrench to disassemble his rifle for cleaning.
22. The dentist used a wrench to tighten the bolts on the dental chair.
23. I had to use a monkey wrench to adjust the water pressure in the shower.
24. The bike shop had to special order a rare and expensive torque wrench for the professional cyclist.
25. The firefighter used a wrench to open the hydrant and connect the hose.
26. The contractor had to use an impact wrench to loosen the stubborn bolts on the scaffolding.
27. The carpenter used a wrench to tighten the screws on the ladder.
28. The astronaut used a specially designed wrench to repair the damaged satellite.
29. The farmer used a wrench to fix the irrigation system in his fields.
30. The racecar driver instructed the pit crew to use a torque wrench to make sure the lug nuts were tightened properly.

Common Phases

1. Tighten the bolt; loosen the nut;
2. Adjust the tension; secure the connection;
3. Remove the old part; install the new piece;
4. Torque the fastener; test for stability;
5. Align the components; tighten the set screw;
6. Loosen the lock nut; adjust the position;
7. Tighten the fitting; check for leaks;
8. Remove the rusted bolt; replace with a new one;
9. Lubricate the moving parts; tighten the joint;
10. Secure the clamp; adjust the angle.