"Airscrew" Example Sentences
1. The mechanic replaced the damaged airscrew on the airplane.
2. The pilot checked the torque of the airscrew before takeoff.
3. The noise from the airscrew was deafening.
4. The adjustment of the airscrew improved the aircraft's performance.
5. The failure of the airscrew caused the plane to crash.
6. The maintenance crew inspected the airscrew for any damage.
7. The vibration from the airscrew shook the entire plane.
8. A defect in the airscrew caused the engine to fail.
9. The design of the airscrew was crucial for the aircraft's efficiency.
10. The engineer studied the physics of the airscrew to improve its design.
11. The airscrew generated a powerful thrust to propel the plane forward.
12. The pilot adjusted the pitch of the airscrew to control the altitude.
13. The mechanic lubricated the airscrew to reduce friction.
14. The airscrew rotated at a high speed, cutting through the air.
15. The manufacturer tested the durability of the airscrew before installation.
16. The sound of the airscrew was mesmerizing to the aviation enthusiast.
17. The clockwise rotation of the airscrew created a lift force.
18. The pilot maneuvered the airscrew to change direction during flight.
19. The diameter of the airscrew influenced the amount of thrust produced.
20. The airscrew design was inspired by the wings of a bird.
21. The maintenance crew balanced the airscrew to reduce vibration.
22. The engineer developed a new composite material for the production of the airscrew.
23. The mechanic replaced the corroded airscrew with a new one.
24. The failure of the airscrew was attributed to a manufacturing defect.
25. The rotation of the airscrew created a low-pressure area, pulling the plane forward.
26. The pilot adjusted the throttle to regulate the RPM of the airscrew.
27. The airscrew generated a significant amount of noise pollution.
28. The pitch of the airscrew was critical for climbing and descending during takeoff and landing.
29. The malfunctioning airscrew caused the flight to be delayed.
30. The technician measured the balance of the airscrew using a precision instrument.
Common Phases
1. The
airscrew is broken;
2. The
airscrew is spinning too slowly;
3. The
airscrew is making too much noise;
4. The
airscrew is being replaced;
5. The
airscrew is in need of servicing;
6. The
airscrew is a critical component of the aircraft;
7. The
airscrew controls the propulsion of the aircraft;
8. The
airscrew can be adjusted to optimize performance;
9. The
airscrew pitch needs to be adjusted;
10. The
airscrew is composed of blades and a hub.
11. The pitch angle of the
airscrew can be adjusted to change the amount of thrust generated.