Attenuator example sentences

"Attenuator" Example Sentences

1. The attenuator on the amplifier was set to the minimum.
2. The attenuator was exactly the component I needed.
3. The attenuator was designed to reduce signal strength.
4. The attenuator was adjusted to compensate for the loudness.
5. I installed the attenuator to keep the noise level down.
6. He adjusted the attenuator to reduce the sound quality.
7. I found the attenuator in the back of the amplifier.
8. The attenuator was used to balance the sound levels.
9. The attenuator was used to reduce the signal strength.
10. He connected the attenuator to the amplifier circuit.
11. I replaced the attenuator to reduce the volume.
12. The attenuator was connected to the speaker output.
13. The attenuator was carefully adjusted to the desired level.
14. The attenuator was used to adjust the sound levels.
15. He checked the attenuator to make sure it was working properly.
16. The attenuator was used to control the strength of the signal.
17. He used the attenuator to reduce the signal strength.
18. The attenuator was adjusted to reduce the sound level.
19. He adjusted the attenuator to reduce the loudness.
20. The attenuator was used to reduce the sound intensity.
21. I installed the attenuator to control the sound level.
22. He used the attenuator to reduce the volume of the signal.
23. The attenuator was connected to the amplifier to reduce the sound.
24. He checked the attenuator to ensure it was working correctly.
25. The attenuator was used to reduce the power of the signal.
26. I adjusted the attenuator to reduce the sound intensity.
27. He connected the attenuator to the amplifier to reduce the volume.
28. I replaced the attenuator to control the sound level.
29. The attenuator was used to reduce the power of the signal.
30. He adjusted the attenuator to control the sound level.
31. I found the attenuator in the back of the amplifier circuit.
32. The attenuator was adjusted to reduce the loudness of the signal.
33. I adjusted the attenuator to keep the noise level down.
34. He used the attenuator to balance the sound levels in the room.
35. The attenuator was connected to the speaker output to reduce the sound.
36. I checked the attenuator to make sure it was working properly.
37. He replaced the attenuator to reduce the signal strength.
38. The attenuator was carefully adjusted to the desired level of sound.
39. I installed the attenuator to reduce the sound intensity.
40. He connected the attenuator to the amplifier to control the volume.