"Borescope" Example Sentences
1. The technician used a borescope to inspect the inside of the engine.
2. The borescope was able to capture high-quality images of the damaged pipe.
3. The airplane was grounded until a borescope examination could be conducted.
4. The borescope revealed the source of the oil leak in the transmission.
5. The task of inserting the borescope into the narrow pipe proved challenging.
6. The borescope allowed us to identify the blockage in the drain without causing damage.
7. A borescope is a valuable tool for diagnosing problems in hard-to-reach areas.
8. The mechanic inserted the borescope into the intake manifold to check for buildup.
9. The borescope revealed defects in the weld that needed to be fixed.
10. The borescope examination confirmed our suspicions about the cause of the failure.
11. The borescope was able to capture images of the corroded wire connections.
12. The mechanic was able to locate the source of the rattling sound with the borescope.
13. The manufacturer used a borescope to inspect the turbine blades before delivery.
14. The borescope allowed us to inspect the welds on the inside of the tank.
15. The borescope revealed cracks in the engine block that were causing oil leaks.
16. The borescope was able to capture footage of the bird's nest inside the chimney.
17. The borescope examination enabled the doctor to make an accurate diagnosis.
18. The inspection of the water tank required the use of a special borescope.
19. The borescope revealed corrosion in the drain line that needed to be replaced.
20. The camera attached to the borescope allowed us to monitor the progress of the inspection.
21. The operator positioned the borescope to inspect the underside of the cargo hold.
22. A borescope is a useful tool for inspecting the condition of the air ducts in a building.
23. The borescope examination confirmed the presence of blockages in the fuel line.
24. The borescope enabled us to check the condition of the muffler without removing it.
25. The technician used the borescope to inspect the internal structure of the turbine engine.
26. The borescope revealed rust in the water main that required maintenance.
27. A borescope can be a valuable tool for inspecting underground pipes and conduits.
28. The borescope allowed us to see the cracks in the wall without causing damage.
29. The use of a borescope reduced the need for invasive procedures in the inspection process.
30. The borescope examination identified the damaged area of the electrical conduit.
Common Phases
1. Checking for defects with a
borescope;
2. Inspecting tight spaces with a
borescope;
3. Detecting problems with a
borescope;
4. Examining interior components with a
borescope;
5. Diagnosing issues with a
borescope;
6. Identifying blockages with a
borescope;
7. Evaluating machinery with a
borescope;
8. Assessing equipment with a
borescope;
9. Troubleshooting with a
borescope;
10. Analyzing engine components with a
borescope.