Bradawl example sentences

"Bradawl" Example Sentences

1. He used the bradawl to start the hole in the wood.
2. The carpenter inserted the bradawl into the board to create a starting point for the drill bit.
3. She used the bradawl to mark the spot for drilling.
4. Screwing a bradawl into the wooden end grain produces divots for nails.
5. I used a bradawl to make an indentation for driving screws into the hardwood flooring.
6. The bradawl punched a pilot hole for the screw.
7. Bradawls come in various sizes depending on the diameter of hole required.
8. Once the bradawl created an indentation, the screw easily seated itself in the wood.
9. The bradawl pierced the wooden surface, enabling the nail to go in smoothly.
10. Using a bradawl instead of a screwdriver prevents splitting or cracking the wood.
11. The bradawl made quick work of marking all the spots for the screws.
12. Handheld bradawls make it easy to mark positions for fasteners precisely.
13. Grasping the bradawl firmly, I scored an indentation in the soft pine board.
14. He twisted the bradawl into the wood to create a starting point for drilling.
15. Stainless steel bradawls are long-lasting and resist rust and corrosion.
16. Bradawls are ideal for predrilling and countersinking holes in hardwood.
17. I pushed the bradawl into the hole I had drilled and twisted it to widen the aperture.
18. Using a bradawl before driving nails reduces splitting when fastening to end grain.
19. The tapered point of the bradawl allowed it to penetrate the wood easily.
20. She pounded the bradawl into the center of the marked spot to start the hole.
21. The bradawl made quick work of pre-marking the nail holes in the baseboards.
22. The tip of the bradawl dug into the wood, enlarging the hole for the nail head.
23. The tapered shaft of the bradawl allowed it to twist its way into the hardwood.
24. By turning the bradawl, I widened the hole so the screw would fit snugly.
25. Using the bradawl to mark each hole ensured all the screws lined up perfectly.
26. The sharp point of the bradawl punctured the surface of the panel with ease.
27. Bradawls come with various diameter tips to match different size screws and nails.
28. Bradawls can countersink without damaging wood like a power tool might.
29. I tapped the bradawl into each corner of the chalkline to mark spots for screws.
30. The bradawl punctured the hardwood flooring without splitting or cracking the surface.
31. Bradawls allow for precise placement and predrilling of holes in wood and drywall.
32. He twisted the tapered blade of the bradawl against the grain of the wood.
33. The metal bradawl scratched the surface but didn't damage the raw wood.
34. Bradawls can precisely mark locations for nails and screws on hard surfaces.
35. The pointed tip of the bradawl penetrated the hard oak easily.
36. Pressing the bradawl down firmly, he scored a deep indentation for the screw head.
37. A bradawl is perfect for creating pilot holes in hardwood where a drill bit might slip.
38. By twisting the bradawl, he created a countersunk hole for the flush-mount screw.
39. Bradawls come with either straight or tapered shafts to match the required depth.
40. Inserting the bradawl into the marked spot allowed the nail to seat fully against the wood.
41. Bradawls can be used for a variety of woodworking, metalworking and leatherwork tasks.
42. The bradawl primed the hole perfectly for the screw to drive straight and true.
43. The smooth, tapered point of the bradawl allowed it to puncture the knot in the wood.
44. Bradawls with knurled brass handles provide excellent grip and torque for driving into wood.
45. Pressing the bradawl tip against the scribe line, he created a starting point for the drill bit.
46. Bradawls enable fastening hardware to be installed without splitting or damaging hard surfaces.
47. Twisting the bradawl created a hole sized for the exact diameter of the fastener.
48. He drove the bradawl into the knot and saw the wood loosen and give way inside.
49. Bradawls are used to mark screw holes, countersink screws and loosen tight knots.
50. The flat blade of the bradawl enabled it to widen the hole without splintering the wood.
51. I pounded the tapered end of the brass bradawl into the dense oak board with ease.
52. By placing the point of the bradawl inside the marked line, I created a precision hole.
53. Bradawls lubricated with wax penetrate and mark wood and materials easier.
54. The bradawl wiggled into the knotty pine like butter, loosening the dense grain.
55. The shaft of the bradawl twisted clockwise, widening the small hole for the screw head.
56. Bradawls provide an alternative to power tools for precision woodworking projects.
57. The tapered end of the stainless steel bradawl punctured the exterior plywood with ease.
58. Handheld bradawls allow fasteners to be positioned accurately without templates or guides.
59. Pressing the bradawl into the knots loosened them enough for the nail to penetrate.
60. The rigid bradawl tapped into the knotted grain of the raw oak board with force.

Common Phrases

1. He used a bradawl to make a small hole in the wood.
2. The bradawl is a handy tool for piercing small holes.
3. They used the bradawl to make pilot holes for screws and nails.
4. He pushed the bradawl through the center of the wood disk.
5. The bradawl went easily through the soft pine.
6. The carpenter's bradawl was used to start small screws.
7. He tapped the bradawl to create a pilot hole for the screw.
8. The fine tapered point of the steel bradawl came in handy.
9. She drilled a small pilot hole with the bradawl for the brass nail.
10. Bradawls come in many sizes and lengths for different uses.
11. The tapered end of the bradawl allowed it to easily pierce the wood.
12. The wooden handle of the bradawl kept his hand comfortable.
13. He worked the bradawl back and forth to widen the pilot hole.
14. The straight bradawl worked well for piercing straight holes.
15. The tapered point of the bradawl wore smooth with use over the years.
16. The workshop shelf held many varieties of bradawls to choose from.
17. He pushed the bradawl through the knot in the wood with some difficulty.
18. He used the bradawl to mark the spot for the first screw.
19. The curved bradawl allowed him to pierce holes at an angle.
20. The bradawl needs to be straight and sharp to work efficiently.
21. The bradawl's tapered point eased into the stubborn piece of hardwood.
22. They worked the bradawl back and forth to widen the pilot holes.
23. The rusty old bradawl was difficult to guide straight through the wood.
24. He applied force as he pushed the bradawl into the hard oak board.
25. She pushed the bradawl all the way through the plywood before drilling.
26. The hole created by the bradawl helped align the screw properly.
27. The brass bradawl twisted easily under pressure of the hardwood.
28. The steel bradawl proved invaluable for the difficult wood joinery.
29. They tapped the bradawl lightly at first to avoid splitting the wood.
30. The wooden handle made the bradawl easy to grip and maneuver precisely.
31. The bradawl looked old but proved sharp enough for the task.
32. The awl point of the bradawl guided the screw into the proper position.
33. They twisted the bradawl to widen the pilot hole for the larger screw.
34. The straight bradawl did not work so well for angled holes.
35. The vintage brass bradawl has been in the toolbox for over 50 years.
36. They lubricated the bradawl with oil to ease its movement through the wood.
37. The curved shape of the bradawl allowed for better access in tight places.
38. He found the bradawl to be an invaluable tool for small joinery work.
39. The tapered brass point of the bradawl eased its way into the hard surface.
40. The set of bradawls came in several lengths for projects of varying sizes.
41. He tried the smallest bradawl for the tiny hole he needed to make.
42. The piercing point of the bradawl allowed it to guide both screws and nails.
43. They used a mallet to gently tap the bradawl into the stubborn wood.
44. With practice, wielding the bradawl became second nature.
45. The bradawl made quick work of creating pilot holes.
46. The bradawl mark shows the exactly spot where to place the screw.
47. The bradawl's piercing point made it perfect for penetrating dense surfaces.
48. She used the bradawl's tapered point as an awl for scoring and marking.
49. The old man kept his faithful bradawl oiled and sharp in his toolbox.
50. The bradawl made mincemeat of the knotted hardwood surface.
51. The set of bradawls held their points well over many years of piercing wood.
52. She used the awl end of the bradawl to mark a line on the wood.
53. They hammered the bradawl into the aged driftwood with difficulty.
54. The woodworker treasured his long steel bradawl for difficult jobs.
55. The bradawl handled both soft and hard woods with aplomb.
56. With precise taps, the bradawl created a tiny hole in the hard board.
57. The tool kit contains an assortment of bradawls for different needs.
58. He pushed the bradawl through the soft pine board at an angle.
59. With patience, the bradawl eventually bored its way through the knot.
60. The leather strap made a handy sheath for keeping the bradawl sharp.