"Bungs" Example Sentences
1. The wine barrel needs a new set of bungs to keep the contents fresh.
2. The mechanic had to remove the bungs from the engine to access the damaged parts.
3. The chemist carefully inserted the bung into the test tube to prevent any spills.
4. The carpenter glued the bungs into place to hide the screw holes in the wood.
5. The bungs on the oil drums were tightly sealed to prevent any leaks.
6. The sailor used a mallet to pound the bungs into the holes of the ship's deck.
7. The medical student inserted the bung into the drainage tube to prevent it from collapsing.
8. The brewer removed the bungs from the fermentation tanks to check the progress of the beer.
9. The winemaker was careful not to damage the bungs when removing them from the barrels.
10. The factory worker tightened the bungs on the chemical containers to prevent any accidents.
11. The plumber inserted the bungs into the pipes to isolate the damaged section.
12. The scientist inserted the bungs into the flasks before heating them to prevent any explosions.
13. The road crew had to replace the bungs on the potholes to prevent any further damage to the road.
14. The farmer used bungs to block off certain parts of the irrigation system to conserve water.
15. The artisan carefully crafted the bungs to fit perfectly into the holes of the pottery.
16. The wine merchant checked the storage room for any loose bungs to prevent any wine spoilage.
17. The electrician removed the bungs from the light fixtures to replace the bulbs.
18. The engineer adjusted the bungs on the fuel tanks to ensure proper fuel flow.
19. The logger used the bungs to mark the trees that needed to be cut down.
20. The firefighter plugged the bungs into the fire hoses and turned on the water.
21. The industrial designer incorporated the bungs into the product to provide a secure fit.
22. The fisherman used the bungs as makeshift floats to mark his fishing spot.
23. The construction worker used the bungs to prop up the scaffolding.
24. The retailer ordered a shipment of bungs to restock their inventory.
25. The decorator used the bungs to secure the drapery tiebacks to the walls.
26. The artist used the bungs to create texture in their painting.
27. The sculptor carved the bungs out of clay to use in the mold-making process.
28. The chef inserted the bungs into the sous-vide bags to prevent any leaks.
29. The gardener used the bungs to prop up the vines on the trellis.
30. The contractor inserted the bungs into the holes in the concrete walls to prevent any water from seeping in.
Common Phases
1. Insert the bung into the hole;
2. Tighten the bung securely with a wrench;
3. Remove the bung from the container;
4. Replace the old bung with a new one;
5. Check for any leaks around the bung;
6. Lubricate the bung before inserting it into the container;
7. Make sure the bung is fully seated in the hole;
8. Use a rubber mallet to gently tap the bung into place;
9. Always keep spare
bungs on hand;
10. Inspect the bung for any damage or wear before using it.