Bushing example sentences

"Bushing" Example Sentences

1. The car's suspension system requires a new bushing.
2. I need to replace the bushing on my skateboard truck.
3. The motor had a worn bushing which needed to be replaced.
4. The bushing on the washing machine was making a strange noise.
5. He couldn't remove the bolt without damaging the bushing.
6. The car's steering system had a faulty bushing which caused it to shake.
7. The bushing in the air compressor needed to be lubricated.
8. The old bushing was worn out and caused excessive vibration.
9. The leaf spring had a broken bushing which caused it to make a clicking noise.
10. The bushing on the door hinge was loose and needed to be tightened.
11. The suspension arm bushing had to be changed as it was causing alignment issues.
12. The bushing for the drill press spindle needed to be replaced.
13. My guitar's tone knob wasn't working, and I found out that the bushing was missing.
14. The bushing in the clutch was making a squeaking noise.
15. A bushing is a component used to reduce friction between two moving parts.
16. The bushing in the pulley system needed to be replaced due to wear and tear.
17. My grandfather had a collection of antique bushings he used for his woodworking.
18. The bushing on the shaft was causing a wobbling effect.
19. The bushing in the fan motor needed to be replaced as it was causing overheating.
20. The car's suspension bushings needed to be checked for wear and tear.
21. The new bushing helped to eliminate the rattling sound of the muffler.
22. The bushing on the skateboard wheel fell off during a ride.
23. The bushing allows the door to swing smoothly.
24. The metal bushing had to be heated to remove it from the steering wheel.
25. The bushings failed during the stress tests, and the design had to be modified.
26. The bushing is often known as a bearing and is found in many different objects.
27. The hollow bushing has a hole in the center for the shaft to fit through.
28. The bushing in the gear system was causing a grinding noise.
29. The bushing is an essential component in many mechanical devices.
30. He carefully placed the new bushing into the sleeve and secured it tightly.

Common Phases

1. Replacing the old bushing;
2. Lubricating the bushing;
3. Checking the condition of the bushing;
4. Tightening the bolts on the bushing;
5. Cleaning the surface of the bushing;
6. Installing a new bushing;
7. Removing the damaged bushing;
8. Inspecting the wear on the bushing;
9. Greasing the bushing;
10. Aligning the bushing.