"Crystallinity" Example Sentences
1. The degree of crystallinity in the sample was found to be 80%.
2. The presence of impurities affected the crystallinity of the mineral.
3. The X-ray diffraction pattern showed high crystallinity in the crystal.
4. The degree of molecular order and crystallinity in the polymer were analyzed.
5. The process of annealing increased the degree of crystallinity in the material.
6. The crystallinity of the diamond was responsible for its luster and hardness.
7. The glass had low crystallinity and high permeability to gases.
8. The changes in the crystallinity of the mineral were due to the pressure and temperature conditions.
9. The Raman spectroscopy results indicated the crystallinity of the crystal.
10. The analysis of the atomic structure highlighted the degree of crystallinity in the material.
11. The in situ measurements revealed a decrease in crystallinity during the deformation process.
12. The detected peaks in the XRD pattern showed a high level of crystallinity in the sample.
13. The high degree of crystallinity in the material resulted in its optical transparency.
14. The SEM images showed clear differences in the degree of crystallinity between the samples.
15. The amorphous region in the polymer affected the degree of crystallinity in the material.
16. The crystallinity index in the lignocellulosic material was determined by the FTIR method.
17. The degree of crystallinity in the mineral influenced its mechanical properties.
18. The crystallographic structure of the mineral determined its degree of crystallinity.
19. The degree of crystallinity in the material was directly proportional to its melting point.
20. The SEM images revealed a high degree of crystallinity in the fiber.
21. The dynamic mechanical analysis showed that the degree of crystallinity affected the viscoelastic properties of the polymer.
22. The degree of crystallinity in the ceramic affected its thermal shock resistance.
23. The nucleation process affected the degree of crystallinity in the material.
24. The changes in the temperature affected the degree of crystallinity in the alloy.
25. The degree of crystallinity in the sample varied with the synthesis conditions.
26. The decrease in the degree of crystallinity was attributed to the presence of defects in the crystal.
27. The degree of crystallinity in the material was affected by the processing conditions.
28. The crystallinity of the mineral was affected by the concentration of impurities.
29. The degree of crystallinity in the polymer was affected by the type of solvent used in the synthesis.
30. The presence of amorphous domains affected the degree of crystallinity in the material.
Common Phases
1. The degree of
crystallinity in this sample is extremely high;
2. The lack of any discernible
crystallinity suggests a non-crystalline structure;
3. The level of
crystallinity appears to be lower than expected;
4. The presence of impurities can reduce the
crystallinity of the material;
5. The high degree of
crystallinity indicates a well-ordered structure;
6. Thermal annealing can increase the
crystallinity of the material;
7. The formation of crystal defects can reduce the overall
crystallinity;
8. The degree of
crystallinity has a significant impact on the properties of the material;
9. The strong
crystallinity in this sample leads to improved mechanical strength;
10. The heterogeneous nature of the sample's
crystallinity may indicate different growth stages.