Cylinder example sentences

"Cylinder" Example Sentences

1. The engine block is in the shape of a cylinder.
2. I need a new brake cylinder for my car.
3. The hydraulic system uses a piston cylinder.
4. The tube was shaped like a cylinder.
5. The canister was cylindrical in shape.
6. The hydraulic press uses a cylinder to create pressure.
7. The engine cylinder needed rebuilding.
8. The vase was a tall, thin cylinder.
9. The submarine has several torpedo cylinders.
10. The diesel engine uses compressed air to move the pistons in the cylinders.
11. The hydraulic fluid flows through a series of cylinders.
12. The water pump contained a cylinder and piston.
13. The gas grill has a propane cylinder attached.
14. The pneumatic drill uses a cylinder to drive the bit.
15. The hydraulic lift uses a pair of cylinders to lift the car.
16. The nitrous system injects extra fuel through the cylinder head.
17. The welding torch uses an oxygen cylinder to produce heat.
18. The crankcase holds the pistons and cylinders.
19. The engine block has eight cylinders.
20. The hydraulic cylinder extended and retracted the arm.
21. The lock is a cylinder that rotates to open or close the door.
22. The pressure washer has a cylinder to build pressure.
23. The engine's cylinder head contains the valves and spark plugs.
24. The compressed air cylinder provided power for the tool.
25. The gas cylinder needed to be replaced for the stove.
26. The engine's pistons move up and down within the cylinder walls.
27. The pneumatic system uses multiple cylinders to power the machinery.
28. The brake system uses a master cylinder to activate the brakes.
29. The ink pen has a clear cylindrical barrel.
30. The rocket engine uses a combustion chamber in the shape of a cylinder.

Common Phrases

1. The cylinder was securely fastened;
2. The cylinder contained a highly explosive substance;
3. The cylinder was made of steel;
4. The cylinder was rapidly approaching the finish line;
5. The cylinder was leaking gas and needed to be replaced;
6. The cylinder was filled to capacity with compressed air;
7. The cylinder was carefully transported using a forklift;
8. The cylinder was a critical component of the engine;
9. The cylinder overheated due to a malfunction;
10. The cylinder was filled with a corrosive chemical.