"Dbmv" Example Sentences
1. The signal strength is at -20 dBmV.
2. Adbmvertising can help increase brand awareness.
3. The cable modem is receiving a downstream power level of 5 dBmV.
4. The dBmV readings are necessary for troubleshooting cable signal issues.
5. Our lab equipment can measure dBmV accurately.
6. A typical TV signal is around 60 dBmV.
7. The dBmV levels can vary depending on distance and interference.
8. It is important to maintain a certain dBmV level to avoid signal noise.
9. The dBmV meter is showing a low reading in this area.
10. The technician adjusted the amplifier to boost the dBmV level.
11. dBmV is a logarithmic unit used to measure signal power.
12. The dBmV level is higher closer to the source of the signal.
13. The peak dBmV reading is 10, which is the maximum level allowed.
14. The attenuator was used to reduce the dBmV level.
15. The dBmV scale is typically used in cable TV systems.
16. The power level has dropped to -25 dBmV, indicating a problem.
17. The dBmV reading can be affected by cable damage or corrosion.
18. The dBmV level needs to be within a certain range for optimal performance.
19. There are different methods for measuring dBmV in different systems.
20. The dBmV range for optimal cable signal is between -10 to +10.
21. dBmV is not the same as dBm, which is used to measure power in electronic circuits.
22. The dBmV level can be checked using a signal splitter.
23. The dBmV reading can fluctuate during different times of the day.
24. A signal booster can increase dBmV levels for better reception.
25. The dBmV scale is based on a reference point of 1 milliwatt in 75 ohms.
26. A cable modem's upstream power level should be around 40 dBmV.
27. The dBmV measurement is useful in determining the amount of signal loss over distance.
28. The signal level dropped to 2 dBmV, indicating cable damage.
29. dBmV values can be converted to other units of measurement, such as millivolts.
30. The dBmV reading can be checked using a spectrum analyzer.
Common Phases
1. The signal strength is -75
dBmV;
2. Your cable modem needs at least -10
dBmV to function properly;
3. The average signal level for this channel is 3.5
dBmV;
4. The downstream power level should be between -15 and +15
dBmV;
5. The upstream power level is currently at 48
dBmV.