Ducting example sentences

"Ducting" Example Sentences

1. The ducting system was leaky and needed to be repaired.
2. The contractor installed new ducting for the air conditioning system.
3. The factory's ducting was designed to ventilate hazardous materials.
4. The HVAC technician inspected the ducting for any obstructions.
5. The ducting was made out of aluminum to resist corrosion.
6. The ducting had to be cleaned regularly to avoid blockages.
7. The damper in the ducting controlled the airflow to different rooms.
8. The insulation around the ducting improved energy efficiency.
9. The ducting was too narrow, which caused too much resistance in the airflow.
10. The ducting was improperly installed, which led to inefficient air distribution.
11. The fire marshal found that the ducting in the building was not up to code.
12. The maintenance crew had to replace the ducting due to wear and tear.
13. The ducting needed to be sized correctly to avoid unnecessary noise.
14. The ducting was coated with a fire-resistant material for safety purposes.
15. The ventilation system required specific ducting components to function properly.
16. The contractor discovered a blockage in the ducting, which caused a major issue.
17. The ducting was strategically placed to direct air to where it was needed most.
18. The ducting was insulated with material that is resistant to mold and mildew.
19. The ducting was designed with straight sections and smooth curves to improve airflow.
20. The facility manager wanted to improve indoor air quality by upgrading the ducting.
21. The ducting was concealed behind walls and ceilings to maintain a sleek look.
22. The building's blueprint showed the layout of the ducting system.
23. The ducting was assembled on-site to ensure a perfect fit.
24. The installer used ducting sealant to prevent any air leaks.
25. The ducting was color-coded for easy identification of each section.
26. The ducting was equipped with sensors to monitor temperature and humidity levels.
27. The manufacturer recommended the use of specific tools for cutting and bending the ducting.
28. The inspector found that the ducting needed to be properly supported to avoid sagging.
29. The engineer designed the ducting system to maximize energy efficiency.
30. The ducting was made from flexible material to accommodate tight spaces.

Common Phrases

1. The ducting system was installed in the building;
2. The technician was repairing the HVAC ducting;
3. The hot air was being pushed through the ducting;
4. The ducting was insulated to prevent energy loss;
5. The volume of air flowing through the ducting was measured;
6. The air ducting was cleaned regularly to maintain indoor air quality;
7. The ducting was connected to the rooftop ventilation unit;
8. The ducting had become clogged with debris and needed to be unclogged;
9. The ducting had to be rerouted due to a renovation project;
10. The ducting was made of galvanized steel for durability.