"Etchant" Example Sentences
1. The etchant solution was crucial in removing the excess metal from the circuit board.
2. The metal plate was etched by using a powerful chemical etchant.
3. The etchant reacted strongly with the metal surface, creating intricate patterns.
4. The etchant was applied in a controlled manner to ensure precise etching.
5. The etchant solution was made from a blend of acids and oxidizers.
6. The etchant had to be carefully handled due to its corrosive properties.
7. The high concentration of the etchant ensured quick and effective etching.
8. The etchant solution was left to sit on the metal surface for several minutes.
9. The etchant removed all of the unwanted material from the metal surface.
10. The etchant was used to create a distinct pattern on the copper plate.
11. The etchant was a critical component in the manufacturing process.
12. The etchant produced a beautifully detailed design on the metal surface.
13. The etchant was poured over the metal surface and left to sit.
14. The etchant worked best when heated to a specific temperature.
15. The etchant reacted with the metal to create a chemical reaction.
16. The etchant was left on the metal surface until the desired effect was achieved.
17. The etchant was applied using a brush for precise control.
18. The etchant solution was carefully mixed to ensure a consistent result.
19. The etchant was carefully washed off the metal surface after etching.
20. The etchant solution emitted a strong odor.
21. The etchant left a rough surface texture on the metal.
22. The etchant was poisonous and could cause harm if ingested.
23. The etchant was a powerful chemical capable of dissolving metal.
24. The etchant solution was highly reactive and had to be kept in a tightly sealed container.
25. The etchant was a fundamental component of the metal engraving process.
26. The etchant was incredibly effective at removing unwanted material.
27. The etchant's chemical properties were well understood by experienced metal workers.
28. The etchant reacted with the metal surface to create a distinct patina.
29. The etchant was applied using safety gloves and goggles.
30. The etchant solution was slightly acidic.
31. The etchant ate away at the metal, leaving only the desired pattern.
32. The etchant was composed of volatile chemicals.
33. The etchant was essential in creating complex designs.
34. The etchant was particularly useful in etching copper surfaces.
35. The etchant reacted differently to different types of metals.
36. The etchant required careful handling to avoid injury.
37. The etchant was capable of dissolving metal very quickly.
38. The etchant solution had to be kept away from heat sources.
39. The etchant required careful application to prevent mistakes.
40. The etchant was essential in creating intricate jewelry designs.
Common Phases
1. Apply
etchant to the surface;
2. Leave the
etchant on for the recommended amount of time;
3. Rinse the surface with water;
4. Dry the surface thoroughly;
5. Verify that all residue has been removed; and
6. Repeat the process if necessary.