"Flanges" Example Sentences
1. The flanges on this pipe are crucial for it to fit properly.
2. The mechanic tightened the flanges to prevent any leaks.
3. The flanges on the cylinder head play a vital role in the engine's performance.
4. You need to make sure the flanges are aligned before bolting them together.
5. The metal flanges provide additional strength to the joint.
6. The scaffolding was secured with sturdy flanges.
7. The steel beam was attached to the supports using flanges.
8. The plumber replaced the corroded flanges with new ones.
9. Wiring was passed through the flanges of the electrical box.
10. The flanges on the valve had to be machined to fit properly.
11. The flanges on the corner guards protected the walls from damage.
12. The pipes were connected with bolted flanges.
13. The concrete sections were joined together using flanges.
14. The flanges on the pressure vessel had to be double-checked for safety.
15. The metal sheets were held together with flanges and rivets.
16. The flanges on the hydraulic cylinder needed to be cleaned before installation.
17. The heat exchanger was assembled with precision welded flanges.
18. The water tank was secured to the roof with sturdy flanges.
19. The hose was held in place with flange fittings.
20. The flanges on the manhole cover kept it in place.
21. The intake manifold was attached to the engine block with flanges.
22. The machine's frame was reinforced with flanges for added durability.
23. The flanges on the exhaust system were welded for a secure fit.
24. The pipe was supported by flanges attached to the wall.
25. The flanges on the air compressor had to be replaced due to wear and tear.
26. The flanges on the fuel tank were inspected for leaks.
27. The steam turbine was smoothly integrated with flanges.
28. The flanges on the filter housing ensured a tight seal.
29. The gasket was placed between the flanges to prevent leakage.
30. The connections between the pipes were made secure with flanges and gaskets.
Common Phases
1. The pipe
flanges need to be tightened securely;
2. The gasket material for the
flanges needs to be selected carefully;
3. The
flanges and bolts should be inspected for signs of corrosion;
4.
Flanges should be properly aligned before tightening;
5. Flange faces should be clean and free of debris or damage.