Fuses example sentences

"Fuses" Example Sentences

1. The electric circuit has blown fuses.
2. I need to replace the fuses in my car.
3. The faulty wiring caused the fuses to blow.
4. We lost power because a fuse tripped.
5. The fuse box is located in the basement.
6. The oscillator circuit uses a fuse to limit the current.
7. Make sure to turn off the power before changing the fuses.
8. The heat caused the fuses to melt.
9. The fuse holder is made of plastic.
10. The fuses are rated for 10 amps.
11. The electrical appliance was designed to use 5 amp fuses.
12. The tree limb knocked out the fuses on the power line.
13. The surge protector has built-in fuses for added protection.
14. The blown fuses caused the refrigerator to stop working.
15. The technician replaced the faulty fuses.
16. The short-circuited wires caused the fuses to blow.
17. The power outage was caused by a blown fuse.
18. The fuse blew when I plugged in the hair dryer.
19. The complex computer system uses multiple fuses as a safety feature.
20. The fuse on the old stereo system has corroded.
21. The electrician tested all the fuses for continuity.
22. The overloaded outlet caused the fuses to blow.
23. The fuse blew because of a power surge.
24. The malfunctioning electrical equipment was the cause of the blown fuses.
25. The motor system has a built-in fuse to prevent damage from power surges.
26. The fuse panel distributes power throughout the house.
27. The fuses need to be checked periodically to ensure proper functioning.
28. The circuit breaker protects the fuses from overloading.
29. The metal contacts on the fuses need to be cleaned to ensure a good connection.
30. The fuses are color-coded for easy identification.

Common Phrases

1. Replace the blown fuse;
2. Check the fuse box;
3. Test the fuses with a multimeter;
4. Make sure to use the correct fuse;
5. Reset the circuit breaker or replace the fuse;
6. Always have spare fuses on hand;
7. Use caution when handling fuses;
8. Consult a professional if unsure about fuse replacement;
9. Never exceed the recommended amperage for a fuse.