Gearset example sentences

"Gearset" Example Sentences

1. My mechanic said that the gearset needed to be replaced.
2. The gearset in my bike was causing it to make strange noises.
3. It's important to choose the right gearset for your vehicle.
4. The gearset in the transmission was damaged beyond repair.
5. The gearset on my watch was very complex.
6. The gearset on this machine is very efficient.
7. I need to find a gearset that will fit my specific needs.
8. The gearset for the elevator was malfunctioning.
9. The gearset on the boat was very sturdy.
10. The gearset was the key to getting the motor running smoothly.
11. The gearset on the power drill was stripped.
12. The gearset on the robot was very intricate.
13. The gearset on the conveyor belt needed to be adjusted.
14. The gearset on the bike was made for climbing hills.
15. The gearset in the clock tower needed to be oiled.
16. The gearset on the airplane was what enabled it to take off.
17. The gearset on the excavator was very heavy-duty.
18. The gearset for the roller coaster was very intricate.
19. The gearset on the train engine was very powerful.
20. The gearset on the crane was malfunctioning.
21. The gearset on the bulldozer was very precise.
22. The gearset on the lathe was very smooth.
23. The gearset on the printing press was what enabled it to print so quickly.
24. The gearset on the wind turbine was what made it so efficient.
25. The gearset on the sewing machine needed to be greased.
26. The gearset on the hydraulic press was very robust.
27. The gearset on the forklift needed to be replaced.
28. The gearset on the automatic door was what made it close so smoothly.
29. The gearset on the mixer was very well-balanced.
30. The gearset on the lathe was made of high-quality materials.

Common Phases

1. Installing a new gearset;
2. Checking the gearset for wear and tear;
3. Fine-tuning the gearset for optimal performance;
4. Replacing worn out gearset components;
5. Upgrading the gearset for higher efficiency;
6. Lubricating the gearset for smooth operation;
7. Adjusting the gearset for proper alignment;
8. Calibrating the gearset for accuracy;
9. Testing the gearset under load conditions;
10. Maintaining and servicing the gearset regularly.