Impedance example sentences

"Impedance" Example Sentences

1. The impedance of the circuit needs to be checked before installing the new equipment.
2. The high impedance of the amplifier is causing signal loss.
3. The speaker's impedance must match the amplifier's output to avoid damage.
4. The technician measured the impedance of the capacitor using an ohmmeter.
5. A low impedance output is required to drive long cables without loss of signal.
6. The impedance of the transmission line can affect signal quality over distance.
7. The circuit's high impedance caused a voltage drop across the load.
8. The cable's impedance needs to be matched for optimal signal transmission.
9. Higher impedance speakers require more amplifier power to produce the same volume.
10. The impedance of the microphone needs to be considered when connecting to a mixer.
11. A low-impedance output avoids feedback when using multiple microphones on stage.
12. The input impedance of the effects pedal affects the tone of the instrument.
13. The amplifier's output impedance changes with frequency, affecting the sound quality.
14. The guitar pickup's impedance affects the tone and output level of the instrument.
15. A mismatched impedance can cause audible hum and noise in audio equipment.
16. Balanced cables have lower impedance and better noise rejection than unbalanced ones.
17. The oscillator's impedance needs to be tuned for optimal frequency stability.
18. The ECU measures the impedance of the fuel injector to check for faults.
19. The speaker's impedance curve affects the frequency response of the system.
20. The headphones have high impedance, requiring a powerful amplifier for good volume.
21. The impedance matching transformer changes the load impedance for optimal performance.
22. The filter's impedance must be considered when calculating its effect on the circuit.
23. The output impedance of a power supply affects its efficiency and voltage stability.
24. The impedance meter measures the magnitude and phase shift of complex impedances.
25. The impedance of the cable affects its ability to transmit power efficiently.
26. The transformer's impedance ratio affects the voltage and current levels on either side.
27. The antenna's impedance must be matched to the transmitter's output for efficient transmission.
28. The voltage drop across a resistor is proportional to the current and resistance, following Ohm's law for impedance.
29. The motor's impedance changes with speed, affecting its performance and power consumption.
30. The impedance characteristics of a material affect its ability to block or allow signals to pass through.

Common Phrases

1. The impedance of the circuit is too high;
2. The speaker impedance needs to be matched with the amplifier;
3. The impedance of the transmission line can cause signal loss;
4. Decreasing the impedance can improve power transfer efficiency;
5. High impedance can cause distortion in audio signals.