Impeller example sentences

Related (10): turbine, pump, propeller, blade, rotor, shaft, bearing, volute, diffuser, stator.

"Impeller" Example Sentences

1. The impeller of the pump is made of stainless steel.
2. The impeller blades are designed for maximum efficiency.
3. The impeller was spinning at a high rate of speed.
4. The impeller was damaged and had to be replaced.
5. The impeller shaft was bent and needed to be replaced.
6. The impeller housing was cracked and needed to be replaced.
7. The impeller was clogged with debris and needed to be cleaned.
8. The impeller was designed to move a large volume of water.
9. The impeller blades were designed to move the water efficiently.
10. The impeller was spinning rapidly, creating a strong current.
11. The impeller needed to be replaced due to wear and tear.
12. The impeller was corroded and needed to be replaced.
13. The impeller blades were damaged and needed to be replaced.
14. The impeller was not spinning at the correct speed.
15. The impeller was not properly aligned and needed to be adjusted.
16. The impeller was clogged and needed to be cleaned out.
17. The impeller was spinning too slowly and needed to be adjusted.
18. The impeller was not spinning at the right speed and needed to be adjusted.
19. The impeller was damaged and had to be taken apart for repairs.
20. The impeller blades were bent and needed to be replaced.
21. The impeller was not spinning at the correct rate and needed to be adjusted.
22. The impeller was misaligned and needed to be adjusted for proper operation.
23. The impeller had to be replaced due to a broken shaft.
24. The impeller was spinning too fast and needed to be adjusted.
25. The impeller was not spinning at the proper rate and needed to be adjusted.
26. The impeller was not spinning at the desired rate and needed to be adjusted.
27. The impeller was not spinning at the right speed and had to be adjusted.
28. The impeller was clogged with debris and had to be removed for cleaning.
29. The impeller was spinning too fast and had to be adjusted to the correct speed.
30. The impeller was not spinning at the required rate and needed to be adjusted.
31. The impeller was not spinning at the optimal speed and needed to be adjusted.
32. The impeller was not spinning at the desired rate and had to be adjusted.
33. The impeller was not spinning at the proper rate and had to be adjusted.
34. The impeller was clogged with debris and had to be taken apart for cleaning.
35. The impeller was spinning too slowly and had to be adjusted to the correct speed.
36. The impeller was not spinning at the right rate and had to be adjusted for proper operation.
37. The impeller blades were bent and had to be replaced for proper operation.
38. The impeller was corroded and had to be taken apart for cleaning and repairs.
39. The impeller was not spinning at the correct rate and had to be adjusted for maximum efficiency.
40. The impeller was damaged and had to be taken apart for inspection and repairs.