"Jumpering" Example Sentences
1. The technician is jumpering the wires to test the circuit's integrity.
2. Jumpering the battery terminals is not recommended as it can be dangerous.
3. We need to jumper the broken wire to temporarily fix the connection.
4. The jumpering process in this system is quite complex.
5. Jumpering the two pins together will reset the device.
6. I learned how to do jumpering while attending a technical school.
7. The jumpering technique saved us from having to replace the entire board.
8. He was able to fix the issue by simply jumpering the switch.
9. Jumpering is a critical step in setting up this type of network.
10. I need a jumpering tool to complete this task.
11. We had to remove the jumpering from the circuit to correctly diagnose the issue.
12. The technician suspects that incorrect jumpering may be causing the error message.
13. Jumpering the two terminals is a temporary fix until we can replace the broken part.
14. Before jumpering any component, make sure to power down the system completely.
15. The jumpering process involves connecting two points in a circuit to bypass a problematic component.
16. A small mistake in jumpering can result in system failure.
17. Jumpering is often used in test setups to evaluate circuit performance.
18. Without the proper instructions, jumpering can be a confusing and risky process.
19. Is there a way to jumper around the faulty component in this system?
20. The engineer is currently working on improving the jumpering process for this project.
21. Correct jumpering is essential for this circuit to operate correctly.
22. Jumpering can be a great troubleshooting technique when used correctly.
23. We had to resort to jumpering to get the system to start up again.
24. A small amount of corrosion on the jumpering wire caused the connection to fail.
25. Jumpering saved us from having to replace the entire module.
26. Without proper training, jumpering can be a difficult concept to understand.
27. The technician is double-checking the jumpering connections to ensure they are correct.
28. The use of jumpering in this device allows for more flexibility in circuit design.
29. We can't proceed with the installation until all jumpering is complete.
30. The jumpering process for this device requires a steady hand and attention to detail.
Common Phases
1. "I'm going to jumper these two pins together;"
2. "Is it possible to jumper this connection without damaging the device?;"
3. "We need to jumper the circuit in order to bypass the faulty component;"
4. "
Jumpering these two wires should allow the electricity to flow freely;"
5. "Using a jumper to link these two points is a common troubleshooting technique;"
6. "I'm not sure if we should jumper these two connections or not;"