Lath example sentences

"Lath" Example Sentences

1. The walls were made of wooden laths covered in plaster.
2. He nailed the laths to the wall studs.
3. Laths made of bamboo are commonly used in Southeast Asia.
4. The plaster was applied to the wooden laths.
5. The laths ran vertically up the wall.
6. I cut the laths to fit between the studs.
7. The old wooden laths were rotting and needed replacing.
8. The laths were spaced evenly apart.
9. The base coat of plaster filled in the gaps between the laths.
10. Narrow wooden strips called laths make up the framework for plaster walls.
11. Fresh plaster covered the newly installed laths.
12. The old laths had separated from the wall over time.
13. Metal lathing replaced wooden laths for plaster walls.
14. I nailed the wooden laths into place.
15. The second coat of plaster finished the surface of the laths.
16. He secured the lath to the stud with nails.
17. The lath ran vertically between the wall studs.
18. The space between the lath is called the "lath gap."
19. The plaster was applied in thin coats directly to the laths.
20. Lath and plaster walls are made of wooden strips covered with plaster.
21. The carpenter measured and cut the laths to fit the wall.
22. The laths secured the base coat of plaster to the wall.
23. The lath was nailed securely to the vertical studs.
24. Lath provided the surface for the plaster to adhere to.
25. Plaster fell into the gaps between the wooden lath.
26. The lath was attached to the wall framing members.
27. The wooden laths deteriorated over time.
28. They used wire as lath for the stucco walls.
29. I made sure the laths were level before nailing them in place.
30. Lath and plaster walls have been used for centuries.
31. He secured the wooden lath to the wall studs with bent nails.
32. The laths were nailed horizontally to the vertical studs.
33. They tore out the old deteriorating wooden lath.
34. The gaps between the laths allowed the plaster to key in.
35. Lath and plaster construction was common before drywall.
36. The workers installed the new metal lath for the stucco.
37. Lath provides a base for plaster to adhere to.
38. They applied two coats of plaster over the lath and wire mesh.
39. The wooden lath held the plaster in place until it dried.
40. They covered the metal lath with a mesh layer before plastering.
41. The old wooden lath disintegrated after many years.
42. The lath was attached with nails and plaster washers.
43. The carpenter cut and installed the wooden lath by hand.
44. Lath and plaster walls need regular maintenance.
45. I replaced the deteriorated wooden laths with new ones.
46. The plaster filled the gaps between the wooden lath.
47. The crew installed new metal lath instead of wooden laths.
48. Plaster keys into the spaces between the lath.
49. The old lath had mostly rotted away.
50. He attached narrow strips of lath to the frame for plastering.

Common Phases

1. The lathe in the woodshop can turn logs into bowls and cups.
2. The joiner selected smooth boards and lathe-turned spindles for the furniture.
3. He grabbed the wooden lath and used it to beat the intruder.
4. The craftsman shaped the wood on the lathe until it was perfect.
5. The carpenter cut several lathes to reinforce the garden trellis.
6. The trellis fence was held together with wooden laths.
7. The staves of the barrel were bound together with wooden laths.
8. They used bamboo lathes to make the traditional blinds.
9. The plasterer applied gypsum to the lathe and stud walls.
10. The boy's father taught him how to use the lathe to shape wood.
11. The lath structure provided a base for the plaster ceiling.
12. The artist turned bowls and vases on her pottery wheel and lathe.
13. The lath and plaster walls needed repair after the water damage.
14. The lathe spun the wood at a high speed so he could shape it evenly.
15. The assistant handed the machinist wooden laths from the stack.
16. The lathe-work on the curved banister was intricate and beautiful.
17. They nailed wooden lathe strips to reinforce the chicken coop walls.
18. The new plaster clung nicely to the old wood lathe walls.
19. He measured and cut several lathes from the plank in the yard.
20. The plaster was applied directly onto the wooden lathe walls.
21. The trellis was constructed from wooden laths nailed to posts.
22. The wood lathes were spaced evenly to provide a base for the plaster.
23. She smoothed the spinning wood on the lathe until it was evenly rounded.
24. They covered the lath walls with plaster to create a smooth surface.
25. The bamboo laths were woven into a pattern for the partition.
26. He used clamps to hold the wood steady while shaping it on the lathe.
27. The wood spinning on the lathe sent shavings flying through the air.
28. The joinery on the wooden laths fit tightly together.
29. She guided the lath carefully against the spinning wood.
30. The sculptor carved the wet clay as it turned on the pottery wheel.
31. The wooden laths were nailed onto the wall studs.
32. The old lath and plaster ceiling needed repair before painting.
33. He fashioned elegant spindles using only a lathe and sharp chisel.
34. The lath structure supported the weight of the plaster ceiling.
35. They laid wooden laths across the walls before applying the plaster.
36. The lathe operator made wooden bowls of many different sizes.
37. They used wooden lathes to reinforce the wattle and daub walls.
38. The bamboo lathe baskets had attractive woven patterns.
39. The mason turned a lathe to smooth the edges of the stone pillar.
40. The workshop was filled with shavings from lathe work and chiseling.
41. The spinning wood on the lathe came to a perfect point.
42. The wooden laths served as a base for the wet plaster ceiling.
43. They replaced some rotting lathes before replastering the walls.
44. The lathe turned the rod at a slow steady pace for precise work.
45. The lath-and-plaster walls were common in historical buildings.
46. He used the lathe to create curved and grooved wooden legs.
47. The lathe spindles were installed into the existing banister.
48. The mason turned rough blocks of stone into columns on the lathe.
49. The spinning wood was sanded smooth on the lathe.
50. The cracks in the old lath and plaster walls needed patching.
51. The wooden lathes were fit snugly between the wall studs.
52. The spinning wood made a soft whirring sound on the lathe.
53. The bamboo lathes were woven tightly to provide support.
54. The apprentice watched carefully as the lathe operator worked.
55. The joiner sanded the ends of the wooden lathes until they were even.
56. The length of lathe was measured and cut to size.
57. The spinning wood made fine ribbons of shavings on the lathe.
58. They hung curtains on wooden laths to divide the large room.
59. The plasterer skimmed a smooth coat of plaster onto the lathe work.
60. The joiner cut and fit wooden lathes for the ceiling and walls.