Milliamperes example sentences

"Milliamperes" Example Sentences

1. The current draw was only 10 milliamperes.
2. The device requires a power source of 200 milliamperes.
3. The battery's capacity is 500 milliamperes per hour.
4. The electronic component requires 50 milliamperes to operate.
5. The circuit can handle up to 500 milliamperes of current.
6. The voltage output is limited to 100 milliamperes.
7. The LED panel consumes 5 milliamperes of power when lit.
8. The ammeter measured only 20 milliamperes of current flow.
9. The charging capacity of the device is 300 milliamperes.
10. The power supply delivers up to 1000 milliamperes of current.
11. The device operates on 150 milliamperes of current.
12. The electronic device has a standby current draw of 2 milliamperes.
13. The clock's battery capacity is only 50 milliamperes per hour.
14. The motor requires a startup current of 500 milliamperes.
15. The device was designed for a maximum current draw of 100 milliamperes.
16. The circuit's average current draw is 30 milliamperes.
17. The device's battery can deliver 800 milliamperes of current.
18. The power adapter provides a maximum of 300 milliamperes of current.
19. The efficiency of the device is measured in milliamperes per watt.
20. The device's current consumption should not exceed 50 milliamperes.
21. The electronic component can handle up to 100 milliamperes of current.
22. The battery's maximum charge rate is 200 milliamperes per hour.
23. The circuit's peak current draw is 250 milliamperes.
24. The device's standby current consumption is 10 milliamperes.
25. The LED strip requires a current draw of 20 milliamperes per meter.
26. The battery's discharge rate is 100 milliamperes per hour.
27. The motor's maximum current draw is 1000 milliamperes.
28. The device's input current is rated at 5 milliamperes.
29. The electronic device consumes 50 milliamperes of current when idle.
30. The battery's capacity is 350 milliamperes at 1.5 volts.
31. The circuit's current requirement is 50 milliamperes at 5 volts.
32. The device has a built-in current limiter set to 200 milliamperes.
33. The LED driver can supply up to 500 milliamperes of current.
34. The device's operating temperature range is -20 to 60 degrees Celsius at 100 milliamperes.
35. The amperage measurement was in milliamperes, not amps.
36. The battery's nominal voltage is 1.5 volts, and its capacity is 300 milliamperes.
37. The voltage regulator can handle up to 1 ampere or 1000 milliamperes of current.
38. The device's battery is rated at 3 volts and 600 milliamperes.
39. The electronic component's maximum voltage rating is 12 volts and its current rating is 50 milliamperes.
40. The DC power supply offers a range of voltages and a maximum current output of 500 milliamperes.

Common Phases

1. The device is designed to operate at low milliamperes.
2. The current draw is only a few milliamperes.
3. The battery can power the device for several hours at 100 milliamperes.
4. The circuit uses a milliammeter to measure the current.
5. The output power can be adjusted from a few milliamperes to several amps.