Voltage example sentences

"Voltage" Example Sentences

1. The voltage in this electrical circuit is dangerously high.
2. I need to check the voltage on this battery before I use it.
3. The voltage drops significantly when the light is turned on.
4. The voltage in that area is unstable due to the storm.
5. The voltage regulator helps to stabilize the voltage output.
6. The voltage reading on the device is way too high.
7. The voltage surge caused the equipment to malfunction.
8. The voltage level must not exceed the prescribed limit.
9. The voltage in the power outlet is not high enough to power this machine.
10. The voltage drop along the transmission line is significant.
11. The voltage in the battery cells must be balanced for optimal performance.
12. The input voltage of the amplifier needs to be adjusted.
13. The voltage of this capacitor is too low for this application.
14. The voltage transformer is responsible for stepping up or stepping down the voltage.
15. The voltage of this circuit needs to be measured with a multimeter.
16. The voltage across the resistor determines the amount of current flow.
17. The voltage output of the generator varies with the load.
18. The voltage fluctuations in the power grid can cause damage to electronic devices.
19. The voltage spikes can damage sensitive components in electronic devices.
20. The voltage level of this battery is critical for starting the engine.
21. The voltage drop across the diode can be calculated using Ohm's law.
22. The voltage across the capacitor determines the charge stored in it.
23. The voltage signal needs to be amplified before being processed.
24. The voltage output of this solar panel depends on the light intensity.
25. The voltage rating of this capacitor must not be exceeded.
26. The voltage supply to the motor needs to be adjusted to control its speed.
27. The voltage across the coil generates a magnetic field in an inductive circuit.
28. The voltage drop across the load resistor can be controlled using a transistor.
29. The voltage across the zener diode remains constant regardless of the current flow.
30. The voltage divider circuit is used for reducing the voltage level in a circuit.

Common Phrases

1. The voltage is too high;
2. The voltage is unstable;
3. The voltage drop is significant;
4. The voltage fluctuates frequently;
5. The voltage is within the acceptable range;
6. The voltage is insufficient for proper function;
7. The voltage surge caused damage;
8. The voltage regulator may be malfunctioning;
9. The voltage reading seems inaccurate;
10. The voltage is experiencing interference.