Pipettes example sentences

"Pipettes" Example Sentences

1. The laboratory technician used pipettes to measure the liquids.
2. She carefully transferred the sample into a clean pipette.
3. The pipettes must be thoroughly cleaned after each use.
4. The experiment required precise measurements, so they used the pipettes.
5. The set of pipettes came in different sizes for different volumes.
6. He struggled to fit the pipette tip into the narrow opening of the vial.
7. The pipette dispenser made it easy to quickly fill multiple pipettes.
8. She used the pipettes to transfer the solution into the test tubes.
9. The package of pipettes had a range of capacities, from 0.5 mL to 10 mL.
10. The lab assistant spent hours practicing her pipetting technique.
11. The pipette calibration needed to be checked before using it.
12. The pipettes were stored in a special container to prevent contamination.
13. The pipette pump made it easier to control the amount of liquid dispensed.
14. She accidentally broke the pipette while trying to adjust the tip.
15. The experiment required the use of disposable pipettes to avoid cross-contamination.
16. The student had trouble reading the volume on the pipette due to the small markings.
17. The lab protocol required the use of sterile pipettes to prevent bacterial growth.
18. The lab instructor demonstrated the proper way to use the pipette bulb.
19. The pipettes were made of high-quality materials to ensure accuracy and reliability.
20. The experiment required the use of graduated pipettes to measure precise volumes.
21. She labeled each pipette with the type of solution it contained.
22. The laboratory purchased a new set of pipettes to replace the old, worn-out ones.
23. He had to recalibrate the pipette after accidentally bumping it during the experiment.
24. The pipettes were stored in a cabinet away from direct sunlight to prevent damage.
25. The experiment required the use of glass pipettes to avoid plastic contamination.
26. She used a disposable dropper pipette to add the final ingredient to the mixture.
27. The pipette tips needed to be cut at an angle to ensure proper contact with the liquid.
28. The lab assistant disposed of the used pipettes in the biohazard waste bin.
29. He used a digital pipette to dispense the precise amount of liquid needed for the reaction.
30. The laboratory had a strict policy against using pipettes that were not properly calibrated.

Common Phrases

1. Carefully measure out the liquid using the pipette;
2. Transfer the solution to another vessel with the pipette;
3. Dry the pipette with a paper towel after use;
4. Use a graduated pipette for accurate measurement;
5. Check the calibration of the pipette before using;
6. Avoid touching the tip of the pipette with your hands or any surfaces;
7. Dispose of used pipettes in a designated sharps container;
8. Rinse the pipette with distilled water if it has been used with a corrosive solution;
9. Use a sterile pipette for microbiological experiments;
10. Do not use expired pipettes for accuracy and safety reasons.