Purlin example sentences

"Purlin" Example Sentences

1. The carpenter nailed the purlin to the roof beams.
2. The purlin looked rusty and needed to be replaced.
3. I learned about purlins in my engineering class.
4. The weight of the snow on the purlin caused it to bend.
5. The installer measured out the purlin spacing.
6. The roof collapsed when the purlins weren't installed properly.
7. The contractor called in the crane to lift the heavy purlins.
8. The industrial building required extra-strong purlins to support the machinery.
9. The designer incorporated decorative purlins into the ceiling.
10. The shipment of purlins arrived late, delaying construction.
11. The workers used power tools to cut the purlins to size.
12. The metal purlins were painted to match the color of the roof.
13. The engineer calculated the load capacity of the purlins.
14. The architect designed a unique purlin system for the building's roof.
15. The purlin bolts needed to be tightened in order to hold the roof in place.
16. The purlin brackets were custom-made for this project.
17. The steel purlins were fireproofed for safety.
18. The purlin ends were connected with special fasteners.
19. The builders installed the purlins horizontally.
20. The building code required a minimum number of purlins per square foot.
21. The purlin spacing was adjusted to accommodate the skylights.
22. The old wooden purlins were removed and replaced with aluminum ones.
23. The crew secured the purlins to the wall with brackets.
24. The angle of the purlins was important for proper water drainage.
25. The purlin system of the barn was designed to support hay bales.
26. The contractor inspected the purlins before signing off on the work.
27. The purlin manufacturer offered a warranty on their products.
28. The roofing crew added insulation between the purlins.
29. The purlin installation was completed ahead of schedule.
30. The skylights were securely mounted on the purlins.

Common Phrases

1. Install purlins at regular intervals.
2. The purlins provide support for the roof.
3. The roofing sheets are fixed onto the purlins.
4. Ensure the purlins are level and straight.
5. Use corrosion-resistant purlins for longer lifespan.
6. Purlins can be made of wood, steel, or aluminum.
7. The size and spacing of the purlins depend on the roofing material.
8. Purlins are commonly used in metal building construction.
9. Make sure purlin brackets are securely fastened to the frame.
10. Purlin spacing may need to be adjusted based on snow load in the area.