Purlins example sentences

"Purlins" Example Sentences

1. The weight of the roof is supported by the purlins.
2. The metal purlins were rusted and needed to be replaced.
3. The carpenters installed new purlins to support the roof.
4. The purlins were spaced 16 inches apart.
5. The engineer calculated the load capacity of the purlins.
6. The roof trusses were connected to the purlins with bolts.
7. The wooden purlins were treated with preservatives to prevent rotting.
8. The purlins were painted to match the color of the roof.
9. The workers removed the old purlins and set them aside for recycling.
10. The steel purlins were designed to withstand strong winds.
11. The contractors reinforced the purlins to support the heavy snow load.
12. The architect specified the size and spacing of the purlins in the building plan.
13. The crane lifted the heavy purlins and positioned them on top of the roof.
14. The installer screwed the roofing panels to the purlins.
15. The purlins were prone to sagging due to their age and condition.
16. The corrugated metal roofing was attached to the purlins with self-tapping screws.
17. The roofer climbed up to inspect the condition of the purlins.
18. The purlins were made of lightweight aluminum to reduce overall weight.
19. The roofer added horizontal bracing to strengthen the purlins.
20. The purlins were secured to the building structure with anchor bolts.
21. The wood purlins were treated with fire retardant chemicals for safety reasons.
22. The workers had to work quickly to install the purlins before the rain started.
23. The weight of the solar panels was evenly distributed across the purlins.
24. The contractor used specialized equipment to curve the steel purlins to match the building design.
25. The purlins provided stability and resistance against lateral movement in case of earthquakes.
26. The installer used a chalk line to mark the exact location of the purlins on the roof.
27. The purlins were spaced differently along the roof edge to accommodate the gutter installation.
28. The metal sheets were cut to size and fitted between the purlins to cover the entire roof area.
29. The purlins were fastened to the roof decking with roofing screws.
30. The engineer inspected the purlins before final approval of the building construction.

Common Phrases

1. Installing purlins between roof rafters;
2. Welding purlins together for added strength;
3. Securing purlins to trusses with screws;
4. Cutting purlins to fit between roof supports;
5. Painting purlins to prevent rust and corrosion;
6. Adjusting purlin spacing for different roof loads;
7. Bolting purlins to steel framing members;
8. Inspecting purlins for damage or wear;
9. Replacing damaged purlins with new ones;
10. Installing insulation between purlins for energy efficiency.