Rivets example sentences

"Rivets" Example Sentences

1. The mechanic applied rivets to join the two metal plates together.
2. The old ship's hull was held together with hundreds of rivets.
3. Rivets were used to secure the metal panels to the fuselage of the airplane.
4. The mechanic secured the metal bracket into place with rivets.
5. The rivets along the truck's bed held the sides firmly in place.
6. The worker used a rivet gun to drive the rivets into the metal structure.
7. Rust had formed along many of the rivets fastening the ship's decking.
8. The old railroad car's sides were fastened together with steel rivets.
9. The rivets holding the bridge's girders together were corroded with age.
10. The abandoned factory's walls were falling apart where the rusted rivets had failed.
11. The craftsman attached the metal strips using small aluminum rivets.
12. The scraps of metal were held together with a few rusting rivets.
13. The mechanics tested each rivet to ensure they were securely fastened.
14. The welder heated the rivets to expand them and tighten their grip.
15. The mechanic tapped each rivet into place with a rivet gun.
16. The old boat's boards were secured with rows of corroding rivets.
17. The mechanic checked the rivets for any signs of loosening or wear.
18. The decommissioned ship's plates were held together by thousands of metal rivets.
19. The mechanic inspected each rivet to verify they were the correct size.
20. The rivets attaching the metal framework vibrated with the machinery's movements.
21. The frames were riveted together at each joint with stainless steel fasteners.
22. The mechanic hammered each rivet into place to fasten the panels securely.
23. Rust had formed along many of the iron rivets holding the bridge's supports.
24. The rivets attaching the roof were pulling loose from years of use.
25. The mechanic set the rivet and positioned the bucking bar and rivet squeezer.
26. The girder's edges were securely riveted together for added strength.
27. The rivets attaching the engine's casings had sheared off from the vibration.
28. The mechanic inserted each rivet and flattened the heads with a rivet gun.
29. The deckhands tested each rivethead for stability and security.
30. The old truck's bed was held on with hundreds of rusting rivets.
31. The rivets attaching the steel panels were pulling away from the frame.
32. The mechanic secured the frame to the base with rows of metal rivets.
33. The rivets were installed evenly along all the seams for a secure hold.
34. The metal was riveted together to form a rigid and sturdy structure.
35. The rivet heads were hammered flat to secure the panels in place.
36. The craftsman used counter-sunk rivets to hide the heads from view.
37. The rusted rivets had formed holes in the ship's outer hull.
38. The rivets attaching the roof were pulling loose after years of neglect.
39. The wall plates were riveted together to create a rigid framework.
40. Loose rivets rattled against the metal sides with each bump in the road.
41. Each rivet had to be set perfectly for the parts to fit together correctly.
42. The mechanic checked that each rivet was tight and securely fastened.
43. The loose rivets rattled against one another with every vibration.
44. The abandoned train car's panels were secured with deteriorating rivets.
45. The rusted rivets were corroding holes in the steel framework.
46. The mechanic drove each rivet home until the heads sat flush.
47. The rivets attaching the metal plates were pulling loose from years of use.
48. The boat's parts creaked and groaned as rusting rivets began to fail.
49. The craftsman used pop rivets to quickly fasten the parts together.
50. Each rivet had to be driven in straight and even with the others.
51. Corroded rivets held the structure together in a rickety affair.
52. The mechanic replaced all loose and failing rivets on the structure.
53. The craftsman secured the metal brackets using solid aluminum rivets.
54. The rivets attaching the girders were pulling loose from years of weathering.
55. Rivets dotted the metal framework in neat rows of secure fasteners.
56. The mechanic inspected each rivet for signs of wear and fatigue.
57. The rivets attaching the roof were popping loose during storms.
58. Pop rivets were used to quickly secure the non-load bearing panels.
59. The mechanic replaced all rusted and corroded rivets on the metal shed.
60. Rivets of various sizes were needed to fasten the parts securely together.

Common Phases

1. The mechanic tightened all the rivets to secure the metal plates together.
2. He carefully inspected each rivet to ensure none were loose.
3. The construction worker hammered in rivets to attach the metal beams.
4. The rivets held the wings firmly to the fuselage of the old biplane.
5. The worn rivets had rusted and began popping off the metal frame.
6. The museum exhibit included examples of different types of rivets.
7. Her eyes were always riveted to her textbook as she studied for exams.
8. The rivets attaching the roof sheeting popped off during the storm.
9. For his rivet hammer, he chose a smaller one to avoid damaging the delicate rivets.
10. The engineer carefully designed the layout and placement of all the rivets.
11. The historic battleship still used traditional hand-driven copper rivets.
12. The tiny rivets fastened the delicate watch together.
13. He admired the tooling used to punch, swage and set the rivets in place.
14. The airship's tear was repaired using hundreds of copper alloy rivets.
15. The heel of the shoe came loose after a couple of the rivets popped out.
16. They drove rivets all day long until their hands were sore and calloused.
17. Even the oldest rivets held tight after decades of wear and tear.
18. His gaze was riveted on the beautiful scenery outside the window.
19. The danger of working with rivets was constantly hitting your thumb.
20. The rivet gun made short work of attaching the metal plates together.
21. The historic bridge still used traditional wrought iron rivets.
22. The metalworkers spent hours setting rivets into the boiler assembly.
23. He hammered on each rivet to fully seat and secure it in place.
24. The new steel panels were riveted over the old rusted ones.
25. The rivets snapped securing the two metal sheets causing a dangerous failure.
26. The designer relied on rivets for joinery since he lacked welding equipment.
27. He noted the precise arrangement and patterning of the bridge's rivets.
28. Some of the old rivets corroded and required replacement.
29. Using a snap head rivet allows the head to break off flush.
30. They had to punch hundreds of holes before inserting the rivets.
31. Her eyes were riveted on the TV as her favorite show began.
32. The massive beams were joined with thousands of large steel rivets.
33. The wings detached from the fuselage after a critical rivet sheared.
34. The airplane had pop rivets to allow for easier maintenance.
35. The walls of the ship were riveted together with steel plates.
36. The airplane designer specified flush rivets for the shortest possible drag.
37. Removing the broken rivet was a difficult task for the mechanic.
38. The damaged hull plates were riveted back in place after the collision.
39. They inspected each rivet for signs of corrosion and wear.
40. The historic wooden ship still had iron rivets holding it together.
41. The rivets she set in place held firm under the extreme forces.
42. The sign framed in rusting iron was held together with ancient rivets.
43. Some of those old rivets were set over a hundred years ago.
44. The machinist loaded his rivet gun and began attaching the brackets.
45. The base of the ladder came loose after a critical rivet sheared.
46. The rivets needed to be tight but not so tight as to distort the metal.
47. Close observation revealed missing or damaged rivets all over the surface.
48. They relied on old-fashioned copper rivets which discouraged modernization.
49. Quality rivets were expensive but essential for aerospace applications.
50. The old rivets were too weathered to reuse so they had to be replaced.
51. The new hull plates were riveted in place one by one.
52. The designer favored large rivets to distribute the loads better.
53. Some of the rivets were covered in thick rust and corrosion.
54. They paced out rows for the countless rivets which held the ship together.
55. Workers came from around the world to set rivets on the Golden Gate Bridge.
56. He drilled holes for hundreds of rivets along the metal frame.
57. The rusted rivets gave way under the stress causing the metal beams to fail.
58. Close inspection revealed that many of the rivets were sheared or cracked.
59. The bridge relied on the shear strength of thousands of rivet connections.
60. The metal case was secured with stainless steel industrial rivets.