"Sheave" Example Sentences
1. The crane operator expertly maneuvered the sheave to lift the heavy load.
2. The ship's crew members quickly replaced the damaged sheave on the mast.
3. The mechanical advantage gained by using a sheave can make heavy lifting much easier.
4. The cable slipped off the sheave, causing the machinery to grind to a halt.
5. The tiny sheave played a crucial role in the complex mechanism that powered the clock.
6. The watchmaker used a tiny sheave to turn the winding stem.
7. The rock climber relied on the sheave system to smoothly lower herself down the cliff face.
8. The old-fashioned pulley system used a wooden sheave to guide the rope.
9. The metal sheave was corroded and needed to be replaced.
10. The rescue worker quickly set up a temporary sheave to lift the injured hiker to safety.
11. The large sheave groaned as it lifted the enormous engine block.
12. The fisherman deftly threaded the line through the sheave on the reel.
13. The elevator employs a complex system of sheaves to move the cables smoothly and efficiently.
14. The dockworker expertly guided the rope through the sheave and onto the winch.
15. The engineer's design called for multiple sheaves to distribute the weight evenly.
16. The antique clock's intricate sheave system required regular maintenance to keep it running smoothly.
17. The tension on the cable caused the sheave to creak and groan as it lifted the load.
18. The sailboat's rigging included several large sheaves to guide the ropes and lines.
19. The worker carefully lubricated the sheave bearings to prevent wear and tear.
20. The sheave on the pulley was badly worn and needed to be replaced immediately.
21. The crane operator deftly lowered the sheave to pick up the load from the ground.
22. The weight of the cargo pressed down on the sheave, causing it to buckle under the strain.
23. The winch's sheave was rusted and difficult to turn.
24. The old-fashioned well used a system of sheaves and pulleys to draw up water from deep underground.
25. The crew members carefully cleaned and inspected each sheave before attaching the ropes.
26. The industrial warehouse used a complex network of sheaves to move heavy loads to different floors.
27. The mechanics worked quickly to repair the damaged sheave on the conveyor belt.
28. The antique sewing machine used a delicate sheave mechanism to turn the needle.
29. The ship's captain ordered the crew to replace the worn sheave before setting sail.
30. The mechanics replaced the broken sheave on the engine, restoring it to working condition.
Common Phases
1. The
sheave is missing a pulley.
2. The mechanic greased the bearings in the
sheave.
3. The rope runs smoothly over the
sheave.
4. The
sheave is attached to the crane.
5. The
sheave system needs to be replaced.
6. The
sheave is made of stainless steel.
7. The cable is wrapped around the
sheave.
8. The
sheave was damaged during transport.
9. The
sheave's diameter needs to be measured.
10. The coiled rope was fed through the
sheave.