"Slusher" Example Sentences
1. The slusher machine is used to move rocks and debris out of the way.
2. The miner used his slusher rope to hoist the heavy bucket of ore to the surface.
3. The slusher kept malfunctioning, causing delays in the mining operation.
4. The slusher operator had to be extremely careful to avoid hitting any underground pipes or wires.
5. The slusher was an essential tool for clearing the mine shaft after a cave-in.
6. The slusher was powered by a gasoline engine and could move large amounts of dirt quickly.
7. The slusher bucket was too heavy for the miner to lift alone, so he had to call for help.
8. The slusher was invented in the early 20th century and revolutionized underground mining.
9. The slusher moved back and forth, pulling the heavy load of dirt behind it.
10. The miner attached the slusher to a winch and slowly pulled the bucket to the surface.
11. The slusher blade was worn down from constant use and needed to be replaced.
12. The slusher was operated by two men, one operating the controls and the other guiding the bucket.
13. The slusher made a loud grinding noise as it pushed through the dirt and rocks.
14. The slusher was used to clear out the debris from a collapsed tunnel.
15. The miner was able to clear out the shaft using the slusher and resume his work.
16. The slusher was an indispensable tool for any underground mining operation.
17. The slusher was carefully maneuvered through the narrow passageways of the mine.
18. The slusher operator had to constantly monitor the movement of the bucket to avoid accidents.
19. The slusher was equipped with thick, heavy-duty cables to withstand the strain of pulling heavy loads.
20. The slusher was used to clear out the ventilation shafts to ensure fresh air flow throughout the mine.
21. The slusher was initially powered by steam, but later switched to gasoline or electric power.
22. The slusher operator had to be trained and experienced to know the proper techniques for safe operation.
23. The slusher was used to clear out the waste rock from the ore-bearing material.
24. The slusher was connected to a series of pulleys and gears that operated the bucket.
25. The slusher was used to excavate new tunnels and shafts for mining purposes.
26. The slusher was an important tool for maintaining safety in the underground mine.
27. The slusher was used to clear out the debris from a collapse caused by a seismic event.
28. The slusher was expensive to purchase and maintain, but was worth the investment for the benefits it provided.
29. The slusher was initially invented as a way to clear out coal mines, but was later adapted for other types of mining as well.
30. The slusher was used to clear out the refuse and debris that accumulated in the mine over time.
Common Phases
1. Filling the
slusher with dredge material;
2. Activating the
slusher to start the dredging process;
3. Guiding the
slusher to the targeted area;
4. Maneuvering the
slusher to remove the unwanted material;
5. Dumping the dredged material into a designated area;
6. Stopping the
slusher after the dredging task is completed.