"Thermographical" Example Sentences
1. The thermographical image revealed an unusual hot spot in the machinery.
2. The thermographical camera captured the heat distribution across the building.
3. The thermographical analysis indicated a potential issue with the electrical wiring.
4. With the help of thermographical imaging, we were able to locate the source of the pipe's leak.
5. The thermographical scan showed that the insulation on the pipes was not adequate.
6. The thermographical readings confirmed that the oven was operating at the correct temperature.
7. The thermographical survey highlighted areas where energy was being lost through poor insulation.
8. The thermographical inspection revealed that the roof was not properly sealed.
9. The thermographical test identified a faulty component in the heating system.
10. The thermographical study showed that the motor was overheating due to a lack of lubrication.
11. The thermographical scan showed that the hot water tank was losing heat through its casing.
12. The thermographical image revealed that the window seals were not properly installed.
13. The thermographical camera detected moisture in the walls, indicating a leak.
14. The thermographical analysis suggested that the air conditioning unit was not functioning efficiently.
15. The thermographical readings showed that there was a problem with the ventilation system.
16. The thermographical test demonstrated that there was an issue with the heat exchanger.
17. The thermographical survey indicated that there was inadequate insulation in the attic.
18. The thermographical inspection revealed a crack in one of the furnace's components.
19. The thermographical study showed that the HVAC system was not balanced properly.
20. The thermographical scan detected a faulty thermostat in the building's control system.
21. The thermographical image highlighted areas where there were drafts in the building.
22. The thermographical camera captured evidence of moisture build-up in the attic.
23. The thermographical analysis revealed that there was a gas leak in the boiler room.
24. The thermographical readings showed that the exhaust fan was inefficient.
25. The thermographical test confirmed that there were air leaks around the doors and windows.
26. The thermographical survey suggested that there was a problem with the ductwork.
27. The thermographical inspection detected hot spots on the electrical panel, indicating overloaded circuits.
28. The thermographical study indicated that there was a need for additional insulation in the walls.
29. The thermographical scan revealed that there were gaps in the building's vapor barrier.
30. The thermographical image showed that the radiator was not receiving adequate water flow.
Common Phases
1.
Thermographical analysis revealed hot spots in the machinery;
2. The
thermographical image showed variations in temperature across the room;
3. The
thermographical data was used to identify areas of energy loss in the building;
4. The
thermographical examination detected anomalies in the pipeline;
5. The
thermographical survey helped to diagnose a fault in the electrical system;
6. The
thermographical testing highlighted areas of potential equipment failure;
7. The
thermographical inspection revealed unexpected heat patterns in the circuitry;
8. The
thermographical scan indicated that the insulation was inadequate in some areas.