Tiler example sentences

"Tiler" Example Sentences

The tiler laid new tiles on the bathroom floor.
The kitchen tiles needed regrouting so the tiler came to do the job.
The tiler measured, cut and fitted each tile precisely to cover the wall.
The tiler made sure the tile adhesive was applied evenly to the wall.
The roof needs re-tiling so we called in a professional tiler.
The tiler had the tools and skills needed to replace the damaged tiles.
The tiler grouted the gaps between the tiles to seal them in place.
The bathroom renovation required a skilled tiler to lay the tiles correctly.
The professional tiler inspected the old tiles to identify problems.
The tiles were lifted and replaced by the experienced tiler.
The tiler wet the tiles before applying adhesive to help with bonding.
The new floor tiles were laid by the tiler at a 45 degree angle for visual interest.
I hired a tiler to replace all the damaged tiles in my kitchen.
The tiler cut the tiles to fit precisely around the sink and pipes.
Laying mosaic tiles required patience and skill from the professional tiler.
The tiler used spacers between the tiles to ensure even grouting lines.
The new roof tiles were fitted by the tiler at the correct angle to allow water run-off.
The tiler ground down the edges of the floor tiles to remove any sharp points.
I watched as the experienced tiler laid the new hallway tiles perfectly.
The tiler used a cement mix and tile adhesive to secure the tiles in place.
The tiler recommended sealing the tiles after grouting to protect them.
The tiler checked the walls were level before starting to lay the wall tiles.
The tiler ensured the tiles were cut neatly using a customized tile cutter.
The tiler left the newly fitted tiles to properly set for 24 hours.
The tiling job required the tiler to cut holes for pipes and electrical points.
Professional tilers often recommend sealing between tiles to avoid leaks.
The tiler mixed and applied flexible adhesive for floor tiles.
The tiler demonstrated impressive speed and skill laying the tiles.
The new roof tiles were secured by nails inserted by the expert tiler.
The bathroom remodel included basic tiling skills learnt from the professional tiler.
The tiler needed to ensure the existing wall tiles were properly leveled.
The tiler called attention to areas that needed grout repair and filling.
The tiler replaced damaged roof tiles and ridges before re-tiling the roof.
The tiler made sure fixtures were aligned correctly on the new tiled floor.
The tiler waited for the adhesive to become tacky before laying the tiles.
The tiler inspected the roof top for damage and potential leak points.
The tiler noticed hairline cracks between the old tiles that needed filling.
The tiler used a setting bed to level and secure the tiles on the kitchen wall.
The tiler suggested re-grouting the kitchen tiles to improve their condition.
The tiler used adhesive and spacers to ensure a flat and even tiled surface.
The tiler took great care in fitting each new tile perfectly into place.
The walls have old tiles that need replacing - we'll call in a professional tiler.
The tiler cut relief holes in the floor tiles around the floor joists.
The roof tiling was completed quickly and neatly by the experienced tiler.
The tiler finished grouting the tiles to help preserve their longevity.
The tiler replaced damaged and missing roof tiles with exact replacements.
The professional tiler suggested sealing grout lines to protect against stains.
The tiler checked the angle of the roof before laying the specially shaped tiles.
The tiler prepared the surface by leveling it with a hardcore base.
The tiler cut the tiles to fit snugly around obstacles like heating pipes.
As a tiler, good attention to detail was critical in ensuring a quality finish.
The tiler educated me about the different types and thicknesses of tiles available.
The tiler recommended replacing damaged tiles and fittings before re-tiling.
The tiler spent time measuring and marking out tiles before cutting them.
The heavy duty adhesive used by the tiler formed a permanent bond with the tiles.
The tiled roof was fitted by experienced tilers who ensured all angles were correct.
The old tile adhesive was removed by the tiler before laying the new tiles.
The skilled tiler created beautiful patterns and designs using the tiles.
The tiler explained what grout colors would work best with the tile selection.
The tiler used spacers and leveling tools to make sure the tiles were even.

Common Phrases

The tiler worked on laying new tiles for the bathroom floor.
He started placing the cement bed on the floor before laying the tiles.
He measured and cut the tiles precisely so they fit together snugly without gaps.
The tiler spread the thinset adhesive onto the floor with a trowel before placing each tile.
He knocked the tiles into place with a rubber mallet to ensure they set firmly into the adhesive.
The tiler used spacers to keep even gaps between the floor tiles as he worked.
He grouted the joints between the tiles once all the tiles were laid.
The tiler scraped the excess grout off the tile surfaces while it was still wet.
He sealed the grout lines once the grout had dried fully to protect them from moisture.
The tiler neatly cut the tiles to fit around the baseboards and toilet once he reached the walls.
The new bathroom floor looked great once the tiler finished grouting and sealing the tile job.
She started as a tiler's assistant and helped prepare cement beds and cut tiles.
After a few years, she trained to become a fully qualified tiler herself.
The tiler removed the old ceramic tiles from the walls before laying the new tiles.
He careful measured and marked out where the wall tiles would need cutting.
The old tiles were stuck fast to the wall so the tiler used a hammer and chisel to break them up.
He applied tile adhesive to the wall with a trowel using straight horizontal strokes to give an even coverage.
The tiler pressed each wall tile firmly into place and tapped it with a rubber mallet.
Once all the tiles were on the wall, he grouted the spaces between them.
The new tile design transformed the dated look of the bathroom.
She cleaned up the leftover tiling materials and tools once the tiler had finished for the day.
The tiler inspected the old tiles and explained the best way to replace them.
The tiler recommended that new cement backing board be installed before laying new floor tiles.
The walls also needed retiling so the tiler suggested removing the old wall tiles first.
Before work began, the tiler prepared a quote and estimate for labor and materials.
The tiled roof on the house needed several loose or cracked tiles replaced.
The tiler removed the damaged roof tiles and marked where new tiles would match the pattern.
He secured the new tiles to the roof with tile nails or clamps, fitting them into the existing pattern.
The old and new tiles were the same color and shape so the replacement blended in seamlessly.
The tiler inspected the new tiled roof when finished to ensure a watertight installation.
After years on the job, the tiler had developed strategies to make tile jobs go smoothly and quickly.
He often advised homeowners on the best options for updates or replacements to improve tile installations.
For intricate mosaic tile designs, the tiler used small tile nippers and cutters to create perfect shapes.
On new construction jobs, the tiler worked with other tradespeople early in the build process.
The tiler always checked tile surfaces for flatness, levelness, and cleanliness before beginning work.
He cautioned homeowners to take extra time sealing grout joints thoroughly to prevent stains and moisture issues.
The tiler compiled lists of tile materials ahead of time to ensure all the needed supplies were on hand.
He had a set of techniques to offer stress-free results for homeowners, based on years of experience.
The tiler produced high quality workmanship that added value and beauty to the homes and buildings he worked on.
After tiling a large bathroom floor, the tiler swept up the leftover tiles and disposed of the tile debris properly.
Customers appreciated the tiler's careful craftsmanship and his attention to detail.
The tiler always protected tile surfaces from scratches and dirt during installation.
He suggested a wide variety of tile colors, patterns, and styles to match customers' design preferences.
The new tiles completely transformed the once outdated bathroom into a stylish modern space.
The tiler installed decorative inlay borders and trim pieces to finish off tile jobs beautifully.
The tiler worked slowly and methodically to ensure straight, even tile rows in complex geometric patterns.
He tried out new creative designs and techniques with leftover tiles to practice and hone his skills.
The tiler cleaned up neatly after a job, sweeping and vacuuming the work area thoroughly.
His skills and expertise were in high demand for important commercial and residential tiling projects.
The tiler demonstrated safe work practices, wearing protective gear and storing tool blades safely.
He advised homeowners on maintenance and upkeep of tiled surfaces to prolong the life and beauty of tile installations.
The tiler pointed out options for filling in small cracks or chips that formed in floor tiles over time.
Skilled tilers work to extend the useful lifespan of tile work through expert repair advice and techniques.
The tiler offered a range of quoting and planning options depending on customers' budget and timeline needs.
After a tiling job, the tiler reviewed overall satisfaction with the customer and handled any issues quickly.
Following safe practices was very important to the careful and experienced tiler.
Potential hazards of tile work included sharp edges and falling from heights on ladders.
The tiler strived to improve the aesthetics and function of homes through his mastery of tiling techniques.
Customers praised the tiler's professionalism, honesty, and attention to safety as much as his craftsmanship.
The smooth, flat tile surface and consistent grout lines showed the tiler's high degree of skill.