"Tolerances" Example Sentences
1. The machine was built with tight tolerances to ensure accuracy.
2. The project specifications called for precise tolerances.
3. The metal had been machined to close tolerances.
4. The manufacturing process requires stringent tolerances.
5. Even the smallest deviations from the tolerances can cause defects in the product.
6. The engineers had to adjust the tolerances to meet safety regulations.
7. The parts were checked for tolerances before assembly.
8. The design was revised to allow for looser tolerances.
9. The production line had to be shut down due to inconsistencies in tolerances.
10. The final product met all of the tolerances specified in the blueprint.
11. The company prides itself on its ability to produce parts to exact tolerances.
12. The team worked tirelessly to ensure that the tolerances were met.
13. The engineers used advanced software to calculate the necessary tolerances.
14. The prototype had to be scrapped due to incorrect tolerances.
15. The machinery had to be calibrated to meet the strict tolerances required.
16. The project required several iterations to achieve the desired tolerances.
17. The material used had to be carefully chosen to meet the tolerances needed.
18. The machinist had to use specialized tools to achieve the necessary tolerances.
19. The tolerances varied depending on the type of material being used.
20. The project manager was responsible for ensuring that the tolerances were met.
21. The team was constantly monitoring the tolerances during the production process.
22. The manufacturer had to invest in new equipment to achieve the required tolerances.
23. The tolerances had to be adjusted to account for temperature changes.
24. The machine operator had to make adjustments to the tolerances throughout the production run.
25. The inspector was responsible for checking the tolerances of the finished product.
26. The customer was satisfied that the parts met the required tolerances.
27. The design team had to take into account the tolerances of the manufacturing process.
28. The project engineer was responsible for setting the tolerances for each component.
29. The manufacturer had a reputation for being able to produce parts with extremely tight tolerances.
30. The tolerances were specified in the contract and had to be met in order to receive payment.
Common Phases
1. Tight
tolerances are required for this project;
2. We need to adjust the
tolerances to ensure accurate results;
3. The manufacturer's
tolerances must be met for quality control;
4. You must adhere to the specified
tolerances when machining this part;
5. It is important to understand the
tolerances for each component in the assembly;
6. We need to consider the
tolerances when designing the product;
7. These
tolerances are crucial for maintaining safety standards;
8. The customer's expectations for
tolerances should be communicated clearly;
9. The machining process must be precise to achieve the required
tolerances;
10.
Tolerances may need to be adjusted as environmental conditions change.