"Tracert" Example Sentences
1. The network administrator ran a tracert command to identify the source of the connection problem.
2. She used a tracert tool to determine the hop-by-hop path taken by the data packets.
3. The tracert output showed that there was a delay at the fifth hop.
4. He had to run tracert several times to accurately pinpoint the issue with the network.
5. Using tracert, she discovered that the data packets were getting lost during transmission.
6. The tracert test revealed that the problem was with the router located at the second hop.
7. He used tracert in combination with ping to troubleshoot the network issue.
8. She examined the tracert results to determine which network devices were causing delays.
9. The tracert output showed that the packet was being sent to the wrong IP address.
10. He used the tracert command to diagnose the routing problem between two networks.
11. The tracert results indicated that the issue was caused by a router malfunction.
12. She ran a tracert test to find out why certain web pages were not loading.
13. The tracert tool helped identify the exact location of a network blockage.
14. He analyzed the tracert output to identify any unusual routing patterns.
15. She used tracert to verify that the data packets were following the correct path.
16. The tracert report showed that the issue was with the internet service provider's network.
17. He conducted a series of tracert tests to determine the source of the connectivity problem.
18. She relied on tracert to investigate why an email message was not being delivered.
19. The tracert results showed that the issue was with a firewall blocking the traffic.
20. He instructed his team to use tracert to identify the network bottleneck.
21. She configured the tracert tool to display the DNS names for each hop.
22. The tracert command helped him locate a misconfigured router on the network.
23. He used tracert to trace the path taken by a packet and find out where it was getting lost.
24. She ran a tracert test to troubleshoot a slow internet connection.
25. The tracert tool revealed that the packet was being redirected multiple times before reaching its destination.
26. He interpreted the tracert output to identify the IP addresses of the routers in the path.
27. She discovered that the dns lookup was timing out after running the tracert command.
28. The tracert output showed that the packet was being blocked at a firewall.
29. He conducted a tracert test to identify a routing loop that was causing packet loss.
30. She used tracert to troubleshoot a connectivity issue between two subnets.
Common Phases
1. Tracing route to google.com;
2. Request timed out;
3. Destination host unreachable;
4. Trace complete;
5. Hop count exceeded;
6. No response from target host;
7. Unknown host;
8. Maximum hops reached;
9. Unable to resolve target host.