Varnish example sentences
Related (10): coat, lacquer, shellac, enamel, glaze, polish, finish, sealant, stain, tint.
"Varnish" Example Sentences
Common Phases
1. He coated the wood floor with varnish to protect and enhance its natural beauty.
2. She varnished the antique table to restore its color and shine.
3. He applied a coat of floor varnish to seal the wood.
4. The craftsman applied several thin coats of polyurethane varnish to the wooden toy.
5. They painted and varnished the new furniture before assembling it.
6. She removed the old varnish with lacquer thinner and sandpaper before reapplying fresh varnish.
7. The boat needed new varnish on its wooden deck.
8. The varnish remover softened the old finish so it could be scraped away.
9. The cabinetmaker applied a protective coat of spar varnish to the cabinets.
10. She sanded in between each coat of varnish to ensure a smooth finish.
11. They applied satin varnish to the wooden bookshelves for a soft sheen.
12. The old varnish was peeling and chipped so they completely stripped and refinished the floor.
13. He brushed on an initial coat of brushing varnish with a foam brush.
14. Let the first coat of varnish dry completely before applying the second.
15. The finish carpenter finished the door frame with a clear polyurethane varnish.
16. She stripped and refinished the antique dresser by sanding, varnishing, and waxing it.
17. The man checked to ensure that the previous layer of varnish had cured before adding another coat.
18. The old varnish yellowed with age so he removed and replaced it with fresh varnish.
19. The artist used oil-based polyurethane varnish on his wooden sculptures.
20. The do-it yourselfer removed the old varnish with a heat gun before applying new varnish.
21. Before applying the linseed oil varnish, he wiped the surface with a damp cloth to remove dust.
22. The stained floor needed extra coats of varnish for proper protection.
23. The old varnish made the wooden floor sticky from trapped dirt and spills.
24. His first few attempts at applying varnish resulted in an uneven finish.
25. He sanded in between coats of varnish using progressively finer grit sandpaper.
26. The old shellac varnish peeled up around the edges of the tabletop.
27. She tested a small section of the floor to ensure the varnish color matched the existing finish.
28. The water-based polyurethane varnish dried quickly and evenly.
29. They coated the interior of the wooden boat with multiple thin coats of varnish.
30. They repaired any cracks and scratches in the wood before applying the new varnish.
31. The workshop helper fetched the turpentine and varnish for the carpenter.
32. The lemon oil and wax treatment made the wood glow without an unnatural varnish.
33. The marine varnish protected the boat from water damage.
34. They lightly sanded the countertop between coats of polyurethane varnish.
35. The stained finish required additional coats of varnish compared to natural wood.
36. Apply the first coat of varnish in the direction of the wood grain.
37. The weathered steps needed to be stripped of their old peeling varnish.
38. The old brushing varnish hardened into clumps over time.
39. The varnish turned cloudy and discolored with age.
40. The milky varnish indicated the presence of moisture in the wood.
41. They left the varnish to cure overnight before applying the final finish coat.
42. Wood varnish adds durability and beauty to wooden furniture and surfaces.
43. He wiped away spilled varnish before it dried and hardened on the surface.
44. They warned not to use lacquer thinner on new polyurethane varnish.
45. Let excess varnish drip off the brush before applying it to the surface.
46. The antique shop sold varnish and supplies for refinishing old furniture.
47. He waited several days for the varnish to harden fully between coats.
48. The angry customer returned the newly varnished table when the finish cracked.
49. The woodworker sanded the piece to smooth out tiny bubbles in the varnish.
50. The matte varnish provided a flat finish for the wooden wall panels.
51. He tried several times to remove the sticky varnish from the floors unsuccessfully.
52. The applicator left brush marks in the wet varnish on the banister.
53. Wipe excess varnish off the surface with a rag while it is still wet.
54. Regular reapplication of fresh varnish helps maintain a beautiful wooden finish.
55. The final coat of varnish formed a durable seal over the newly stained surface.
56. The dusty environment made applying a smooth varnish finish difficult.
57. They replaced the incompatible varnish that had flaked off the furniture.
58. The carpenter painstakingly smoothed and evened the finish of the varnish.
59. His technique for applying varnish improved with practice and experience.
60. The specialist advised applying several thin coats of varnish rather than one thick coat.