Vise example sentences

"Vise" Example Sentences

1. He clamped the piece of wood tightly in the vise.
2. The mechanic tightened the bolt with the vise.
3. She used the vise to grip the metal sheet firmly.
4. The carpenter adjusted the vise to hold the workpiece firmly.
5. The blacksmith pounded the hot metal on the vise.
6. He released the pressure on the vise slowly.
7. The machinist used a vise to secure the workpiece while drilling.
8. The dentist used a vise-like grip to extract the tooth.
9. The metalworker shape the iron bar on the vise.
10. The jeweler used a delicate vise to hold the precious gemstone.
11. The plumber tightened the pipe using the vise.
12. She created a vise-like grip with her fingers to hold the slippery fish.
13. He attached the vise to the workbench using bolts.
14. The sculptor fashioned the clay on the vise.
15. She adjusted the vise to fit the oddly-shaped object.
16. The model maker used a miniature vise to hold the tiny parts.
17. He released the workpiece from the vise after finishing his task.
18. The woodcarver chiseled the intricate design on the vise.
19. She needed an extra set of hands, so she used the vise to hold the object.
20. The leatherworker pressed the material on the vise to flatten it.
21. The fisherman secured the fishing rod in the vise to add new components.
22. He built the birdhouse using a vise to grip the pieces together.
23. The clockmaker used the vise to hold the tiny gears in place.
24. She adjusted the vise to clamp the round object.
25. The metal caster used a vise to hold the mold while pouring the liquid metal.
26. The writer tightened her grip on the pen like a vise, trying to find the right words.
27. He used the vise to hold the flashlight while fixing the car engine.
28. The technician measured the object while it was clamped on the vise.
29. The sculptor pounded the chisel on the statue's face while holding it on the vise.
30. She straightened the bent metal plate using the vise with precision.

Common Phases

1. Tightening the vise;
2. Releasing the vise;
3. Adjusting the vise;
4. Clamping the workpiece in the vise;
5. Loosening the vise grips;
6. Securing the vise to the workbench;
7. Rotating the vise to a different angle;
8. Removing the workpiece from the vise.